Multiplex Technology 16CH, 8CH, 4CH user manual Getting Started

Page 13

GETTING STARTED

2.1 GETTING STARTED

Connecting all the devices to construct a surveillance.

1)Install HDD:

The HDD must be installed before the DVR is turned on.

2)Connect cameras.

3)Connect monitors.

4)Connect the external devices.

NOTE:

Please refer to Appendix #1 for HDD installation instructions.

NOTE:

Please refer to “Section 1.5 Rear Panel” for connection.

NOTE:

Please refer to Appendix#2 for pin configurations of the external I/O port .

5)Connect the AC power cord to power adapter and plug into an electrical outlet. The standby LED would be on as red.

Press the “POWER” button. The power LED will be on as red. It takes approximately 10 to 15 seconds to boot the system.

Take 16CH as an example

Available Capacity of

Internal HDDs

System Time

Under HDD Overwrite

Mode

Channel Title

10

Image 13

Contents User’s Manual CE Mark Important SafeguardTable of Contents Features Parts and FeaturesPackage Contents Model SpecificationOptional Peripherals Front Panel Power16CH / 8CH 16CH D / 8CH D / 4CH D Enter / RecordPage HDD Cartridge Lock 4CHLED Light SearchZoom Power11 CH1 CH2 CH3 CH4 16CH / 16CH D Rear Panel8CH / 8CH D 4CH / 4CH D ~ But size are differentAudio OUT Getting Started Getting StartedRecording Basic OperationFast Forward F.F. & Fast Rewind REW PlaybackPause / Image JOG Slow PlaybackChannel Shift Menu Menu TreeRecord Main Menu OptionsrecordTimer Record IPS Main Menu OptionstimerMenu Record Timer Date Advance Event Record IPSFormat Main Menu OptionsdateDaylight Saving DateAdvance Menu Camera Main Menu OptionsadvanceAdvance Detection Advance Menu DetectionDetection Timer Detection TimerAdvance Menu Display Advance Menu Alert Device Advance Menu RemoteProtocol PTZ Connection and ControlSystem Advance Menu SystemNetwork Type Static Advance Menu NetworkNetwork Type Dhcp NetworkAdvance Menu Backup Select Disk Backup and then press Enter Advance Menu Event LOG Advance Menu HDD InfoSearch Additional Operation2X Digital Zoom Switch the N/P SystemKEY Lock Licensed Software AP USB UpgradePage Digital Device Control Panel ~ Take 16CH DVR as an example M. n Q. r. s V. w60.121.46.236 Digital Device Control Panel ~ PTZ M. n Q. rPlayback Information Playback OperationTime Progress Bar FunctionsStatic IP NetworkPPPoE DhcpDdns Apply Example Ddns Apply‰ Create Hostname FTP MailDevice DVR Camera SettingMotion Detection Area DetectionMouse Playback Information Time Progress Bar Functions Network Backup & PlaybackPlayback Control Buttons Alarm List AlarmAccount GeneralNormal GuestOnline User Info Alarm Audio PathFile Path Snapshot PathConnect to AP VIA IE Browser Optional Peripherals GprsProblem Solution Trouble ShootingAppendix #1 Appendix #1 Install the HDDOpen the upper cover of the DVR and screw out the bracket ~ Screw HDD to the HDD bracket ~Carefully following the steps to ensure correct installation PIN 13. External Alarm no Appendix #2 PIN ConfigurationPIN 25. External Alarm COM Appendix #2PIN 8. External Alarm no PIN 7. External Alarm NCPIN 14. Alarm Reset PIN 15. External Alarm COMAppendix #3 RS-232 Protocol Appendix #3Appendix #4 Recording Time Table Appendix #4Appendix #5 Compatible USB Brand Appendix #5Manufacturer Model Capacity PQIAppendix #6 Compatible HDD Brand Appendix #6Brand Name Model Capacity Rotation