Multiplex Technology 16CH, 8CH, 4CH user manual Network, Static IP, PPPoE, Dhcp, Web Port

3)Advanced Setting:

60.121.46.236

‰Press “System Config ” button to enter the system setting page.

Network

The network configuration allows DVR to be available for Ethernet network or dial-up.

cStatic IP:

Enter the “server IP”, “gateway”, “net mask” and “web port”, then press “APPLY” to confirm.

dPPPoE:

Enter the “username” and “password” provided by your ISP (Internet Sever ) supplier, then press “APPLY” to confirm.

eDHCP:

This DHCP function need to be supported by router or cable modem network with DHCP service. Choose the DHCP IP type and press “APPLY” to confirm.

***Note***:

PPPoE and DHCP network connection type will require to apply DDNS service to get a “Hostname” to correspond to dynamic IP address.

Please refer to P.38 for details.

***Note***:

Some router brand may need to restart the DVR to get the IP address.

fWeb Port:

The DVR can be viewed over the network with software AP or a web browser. Typically the TCP port used by HTTP is 80. However in some cases it is better to change this port number for added flexibility or security. Valid number is 80 ~ 19999.

37