Multiplex Technology 4CH, 8CH, 16CH user manual Motion Detection Area, Mouse

Detection

Take 16CH as an example

cSelect the desired channel, and press “Edit” to enter the motion detection sensitivity and area setting box.

dMotion Detection Sensitivity: Set the detection sensitivity in 4 different adjustable factors.

LS: The sensitivity of comparing two different images. The smaller the value is, the higher sensitivity for motion detection.

SS: The sensitivity towards the size of the triggered object on the screen (the number of motion detection grids). The smaller the value is, the higher sensitivity for motion detection. TS: The sensitivity towards how long the object gets triggered. The smaller the value is, the higher sensitivity for motion detection.

RE: The value of RE is a reference for detection. The bigger the value is, the higher sensitivity for motion detection.

e Alarm: 60.121.46.236

Select LOW / HIGH for the alarm polarity.

f Motion Detection Area:
	Clicking the area by PC	mouse,
one can choose the motion area to			Note: Enable the motion detection function.
be detected. The under-detection			When the motion is triggered,
area is in transparent picture while			a “	” icon will shown on the
the undetected area is in pink color.			screen. And software AP will start
*Click the “Select All” to clean the			recording automatically.
previously selected detection area.

*Click the “Clear All” to activate the detection area as full area.

g After setting, press “OK” and then press “APPLY” to confirm.

41