2)Software Operation:
cConnect DVR to PC via RJ45 network line.
dLAN Setting :
The default DVR IP is “192.168.1.10”, and default “username” and “password” are both “admin”. Users should set PC’s IP address as “IP:192.168.1.XXX (1~255, except 10)” (in order to make the PC and DVR under the same domain).
eDouble click 
to enter login page.
Key in IP (192.168.1.10), username (admin), password (admin), port (80) in the login page. After connect to the DVR with local LAN, users could modify the network settings in DVR or in system config of the licensed software AP.
fNetwork Type ~ Static IP :
Set the network information in the DVR menu (Section 4.12) or in System Config of the licensed software AP (P.37).
Network Type ~ Dynamic IP (DHCP and PPPoE) :
Set the Network information in System Config of the licensed software AP. For detailed DHCP and PPPoE setting, please refer to P.37 and P.38.
gAfter setup the network information, double click 
to enter login page. Key in “Username”, “ Password”, “IP” (Static IP) or “Host name” (Dynamic IP), and “Port”. And then click the green button to connect.
hLOGIN AP Icon Explanation.
Address Book: Press this button to add a new IP into the IP Address Book
or choose any preset IP address to access the software AP.
Search: Search available DVR IP address in local area network and modify the network setting of the DVR.
Player: Press this button to access and play the recorded files that are saved in your PC.
Copy: Press this button to copy all the software installation files, so users could keep all the settings of video web server for next software installation on other PC.
Upgrade Firmware: Press this button, upgrade DVR firmware. The provided firmware files should be saved at PC first.
NOTE: The version of the licensed software will shown on the login page.
32