APPENDIX #1
APPENDIX #1 – INSTALL THE HDD
16CH / 8CH
16CH (D) / 8CH (D) / 4CH (D)
Carefully following the steps to ensure correct installation.
***Note: If you want to install two HDDs, please set one HDD to “Master Mode” or “Single Mode”, and the other one to “Slave Mode”. ***
1) | Open the upper cover of the DVR and screw out the bracket. 1 ~ 2 |
2) | Screw HDD to the HDD bracket. 3 ~ 8 |
3)Connect the HDD to power connector and IDE BUS (make sure to align the
HDD precisely to the pin connection). 9 ~ 14
4)Close the upper cover of the DVR.
49