Multiplex Technology 8CH, 16CH, 4CH user manual Main Menu Optionsadvance, Advance Menu Camera

4.5 MAIN MENU OPTIONS___ADVANCE

(MENU)

RECORD

TIMER

DATE

►ADVANCE

ADVANCE

CAMERA DETECTION DISPLAY ALERT REMOTE SYSTEM NETWORK BACKUP HDD INFO EVENT LOG

Move the cursor to the “ADVANCE”, and press ”ENTER”, then the screen will show the following options.

4.6 ADVANCE MENU ___CAMERA

Move the cursor to the “CAMERA”, and press ”ENTER”, then the screen will show the following options.

	Take 16CH as an example			CAMERA
	TITLE	BRIG	CONT	SATU	HUE	COV	REC
01		110	128	128	128	NO	YES
02		110	128	128	128	NO	YES
03		110	128	128	128	NO	YES
04		110	128	128	128	NO	YES
05		110	128	128	128	NO	YES
06		110	128	128	128	NO	YES
07		110	128	128	128	NO	YES
08		110	128	128	128	NO	YES
	PREV	NEXT

1)TITLE:

Move the cursor to the title which you want to change, and press “ENTER” to access the setting screen. Assign each channel a title (up to six characters (letters or symbols…)), the default title is the channel number.

2)BRIG / CONT / SATU / HUE:

Adjust the Brightness/Contrast/Saturation/Hue of each channel.

The level is from 0 to 255. The default value of BRIG is 110, others are128.

3)COV (COVERT):

Select “YES” to mask the selected channel which is under recording. When this function is activated, the “COV” words will shown on the screen.

4)REC (RECORD):

Select “YES” to enable the record function; Select “NO” to disable the record.

5)PREV / NEXT:

Select “PRE” to go to the previous page; Select “NEXT” to go the next page.

18