Mitsubishi Electronics WD-52725, WD-62525 manual Operation of PIP and POP

Operation of PIP and POP

You can display programs from analog channels, analog inputs or devices as Picture-In-Picture (PIP) and Picture- Outside-Picture (POP). The TV has a second analog tuner for non-scrambled analog channels received on Ant-1 and will display them as the PIP/POP sub-pictures. Digital channels and devices can be shown as the main picture but cannot be the sub-picture. PC screens can be viewed in the side-by-side mode.

Press PIP/POP to activate the PIP/POP option. With each press of the PIP/POP button on the TV remote control (within 3 seconds of each other), the PIP/POP will cycle through the following display options:

To turn PIP/POP off, wait at least 10 seconds, and press PIP/POP. The next time you activate PIP/POP, the last used PIP/POP option will be displayed

MAIN	Side-by-Side
PICTURE

	POP 1
MAIN
	POP 2
PICTURE
	POP 3

	POP 1	POP 2			POP 3
MAIN
	POP 4	POP 5			POP 6
PICTURE
	POP 7	POP 8			POP 9
Ant-1 2 XXXX			PIP Ant-1 17
Standard
Stereo SAP
TV-PG DLSV
SQV1
			PIP
Ant-1 2 XXXX				PIP Ant-1 17
Standard

Stereo SAP

TV-PG DLSV

SQV1

PIP

Ant-1 2 XXXX

Standard

Stereo SAP

TV-PG DLSV

SQV1

•POP

side-by-side pictures

•3 POP

•9 POP

•PIP large

•PIP small

•PIP/POP: off

Changing PIP/POP Device

Press PIP DEVICE to change the PIP or POP picture source device. A menu similar to the Device Selection menu will be displayed.

Changing PIP/Side-by-Side Channels

Press PIP CH to scroll up and down through memorized channels on Ant-1 and Ant-2.

Exchanging Program Images

Press EXCH to exchange the main picture and the PIP/ POP picture. Pictures from digital channels can only be shown as the main picture.

Moving PIP Image

If no menus are on the screen, press ADJUST , , or to move the PIP display anywhere on the main

screen.

Automatic POP Switching

When automatic POP switching is active, the TV will cycle through memorized analog channels on Ant-1 or Ant-2 or strobe pictures from other A/V components in the POP display. Press PAUSE to pause or restart automatic POP switching.

Selecting POP “Live” Image

Press ADJUST , , or to select a different POP “live” image (automatic POP switching must be paused.)

Freezing the PIP and Side-By-Side Picture

Press PAUSE to freeze the PIP and side-by-side images. Press PAUSE again to return to a “live” image.

IMPORTANT

Side-by-Side cannot show the same channel or device on both sides.

When Ant-1 or Ant-2 is the main picture, Ant-2 is not available as the PIP, POP or Side- by-Side.

PIP/POP is not compatible with signals from media cards.

76