Mitsubishi Electronics WD-52528, WD-62527 Appendix G Filter Cleaning, Cleaning the Dust Filter

Appendix G: Filter Cleaning



TDSFXT EVTU
mMUFS
DPWFS
IJHIMJHIUFE



5BC

C
QVMM

B
TRVFF[F

'JMUFS

DBSUSJEHF PQFO

'JMUFS

Cleaning the Dust Filter

Clean the filter annually and whenever you replace the lamp cartridge.

Tool needed: Phillips screwdriver

1.Turn the television off and unplug the AC cord.

2.Carefully access the back of the television. If the TV must be moved, use two people.

3.Using a Phillips screwdriver, remove the two screws that hold the dust filter cover in place.

4.Carefully remove the dust filter cover from the TV and set the screws aside.

5.Please follow carefully to open the dust filter cover: while squeezing the grating between your thumb and fingers of one hand, pull the tab with the index finger of your other hand. See (a) and (b) in the illustration to the left.

6.Clean the filter material by dusting with a lint-free cloth.

7.If the filter is soiled, carefully pull it out of the cover and rinse it with water. Do not use detergents or soap on the filter.

8.Completely air dry the filter before placing it back into the dust filter cover. Make sure to place the filter with the notched edge at the upper right corner.

9.Replace the filter in the TV and secure with the screws.

IMPORTANT: Never operate this TV without a clean filter in place.

OPUDIFE
FEHF

Chapter 6. Special Features 95