Mitsubishi Electronics WD-62528, WD-62527, WD-52528 specifications 2005

		2005
MITSUBISHIELECTRIC	Service
	Manual
	LCD PROJECTION HDTV
	V28 CHASSIS
	V28 Chassis	V28+ Chassis
WD-52527	WD-52527	WD-52528
	WD-62527	WD-62528
	Pb	Solder

CAUTION:

Before servicing this chassis, it is important that the service person read the "SAFETY PRECAUTIONS" and "PRODUCT SAFETY NOTICE" contained in this manual.

SPECIFICATIONS

• Power Input	: AC 120V, 60Hz
• Power Usage	: 295W
• Light Engine	: 3 LCD (1280 x 720 pixels)
• Light Source	: 110W
• Channel Range	: Air VHF - 2~13, UHF - 14~69
	Analog Cable - 1~25
	Digital Cable - 1~35
• Antenna Input	: 2 RF 75Ω unbalanced
• Tuning	: 1 NTSC/ATSC/QAM

1Out of Band for CableCARDTM

1NTSC for PIP

•Cabinet Dimensions : [WD-52527 / WD-52528] 34"(H) x 49.6"(w) x 17.8"(D)

:WD-62527 / WD-62528 40.5"(H) x 58.3"(W) x 19.9"(D)

• Weight	: [WD-52527 / WD-52528]
	110 lbs
	: [WD-62527 / WD-62528]
	133 lbs

•Speakers (8 Ohms 10W)

:2-5 ½ x 2 ¼ inch

•Design specifications are subject to change without notice.

•Input Level : VIDEO IN JACK (RCA Type) 1.0Vp-p 75W unbalanced

:AUDIO IN JACK (RCA Type) -4.7dBm 43kW unbalanced

:S-VIDEO IN JACK (Y/C separate type)

Y:1.0 Vp-p C:0.286Vp-p(BURST) 75W unbalanced

:COMP / Y, Cr, Cb (RCA Type) Y: 1.0 Vp-p Cr, Cb: 700mVp-p

•Output Level : VIDEO OUT JACK (RCA Type) 1.0Vp-p 75W unbalanced

:AUDIO OUT JACK (RCAType) -4.7dBm 4.7kW unbalanced

• Digital	: IEEE-1394 I/O Jacks
	: AC-3 Digital Audio Output
	(RCAType)
	: HDMITM
Pb Solder	: Lead-Free solder PWBs

MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC.

9351 Jeronimo Road, Irvine, CA 92618-1904

Copyright © 2005 Mitsubishi Digital Electronics America, Inc.

All Rights Reserved

.