Mitsubishi Electronics WD-52528, WD-62527, WD-62528 AV Reset Defaults, LED Indicator Diagnostics

MODEL: WD-52527 / WD-52528 / WD-62527 / WD-62528

AV Reset Defaults

A/V Memory	Ant 1&2	Input	Component	1394	HDMI™
		1/2/3	1/2/3*	(if conn.)	1&2
TV Contrast	Max	Max	Max	Max	Max
TV Brightness	Center	Center	Center	Center	Center
TV Sharpness	Center	Center	Center	Center	Center
TV Color	Center	Center	Center	Center	Center
TV Color Temp.	High	High	High	High	High
Video Noise	Standard	Standard	Standard	N/A	N/A
TV Film Mode (Auto)	On	On	On	N/A	On
TV DefinEdge (VSM)	On	On	On	On	On
TV Bass	Center	Center	Center	Center	Center
TV Treble	Center	Center	Center	Center	Center
TV Balance	Center	Center	Center	Center	Center
TV Surround	Off	Off	Off	Off	Off
TV Listed To	Stereo	N/A	N/A	N/A	N/A
TV Level Sound	On	On	On	On	On

A. A/V Memory

Each of the external inputs has its’ own Audio/Video Memory. A change in an A/V setting at a specific input is stored in memory for that specific input.

B. A/V Reset

1.The front panel AV Reset (pressing the “Guide” and “Format” buttons at the same time) initializes all A/V Memories.

2.The AV Reset in the user’s menu initializes only the selected input’s A/V Memory.

LED Indicator Diagnostics

The front panel LEDs provide an indication of the sets operation, and the possible cause of a malfunction. There are three front panel LEDs, “Power”, “Status” and “Lamp”. Which LED is lit, the color and whether it is blinking or steady indicate the current status, or a possible malfunction.

Normal LED Indications

POWER	STATUS	LAMP	Power	Condition
LED	LED	LED	Status
Off	Off	Off	Stby	Off
Green	Off	Off	P-0N	Power On
Off	Off	Blinks	After Turn	Lamp Fan On for 1 minute
		Green	Off
Blinks	Off	Off	Stby	Booting after AC applied
Green
Slow Blinks	Off	Off	Stby	On Timer is set
Green

Page 26