Mitsubishi Electronics WD-62528, WD-62527 Trapezoid Distortion Adjustment, Rotation Adjustment

MODEL: WD-52527 / WD-52528 / WD-62527 / WD-62528

Trapezoid Distortion Adjustment

1)Loosen [A-1] and [A-2] so they clear [A-3].

2)For Distortion at the top of the picture, rotate [A-3] counter clockwise (the

picture will move upward).

3) For distortion at the bottom of the picture, rotate [A-3] clockwise (the picture will move upward).

Rotation Adjustment

Clockwise Rotation Needed

1) Loosen [A-2]

2) Use [A-1] to adjust rotation.

Counter Clockwise Rotation Needed.

1) Loosen [A-1]

4) Use [A-2] to adjust rotation

After Adjustment (refer to previous page)

1)Tighten Nuts (1) and (2).

2)Tighten Slide-Lock-Mate fixing screws (1) and (2).

3)Insure [A-1] and [A-2] are flush against [A-3].

Page 31