Mitsubishi Electronics WD-62527, WD-62528, WD-52528 specifications Light Engine Adjustments

MODEL: WD-52527 / WD-52528 / WD-62527 / WD-62528

Light Engine Adjustments

Test Signal Activation

1)Press “MENU-2-4-5-7” (Service Mode)

2)Press “REW” (Test Pattern).

Red = 4% overscan

White = 5% overscan

Green = 6% overscan

Cyan = 7% overscan

Yellow = 10% overscan

Prelminary (refer to the diagram below)

1)Remove Back Board

2)Loosen Fixing Screws (1) and (2) in the Slide Lock Mate

3)Loosen Nuts (1) and (2) on the Adjuster

4)Loosen [A-1] and [A-2] on the Adjuster

Light Engine (Rear View)

Page 30