Mitsubishi Electronics WD-62527, WD-62528 Lenticular Screen and Fresnel Lens Installation

MODEL: WD-52527 / WD-52528 / WD-62527 / WD-62528

SERVICING THE LENTICULAR SCREEN AND FRESNEL LENS

Lenticular Screen and Fresnel Lens Installation

Note: Store the Lenticular Screen and Fresnel Lens in a cool dry place. High humidity may deform the Lenticular Screen and Fresnel Lens.

1.Apply double coated tape (Part #LENS-TAPE) along the top rear edge of the Lenticular Screen, as shown below. Refer to the table below for the tape length.

2.Sandwich the Fresnel Lens and Lenticular Screen together. The Lenticular Screen label must be towards the front and the Fresnel Lens label towards the rear. (Figure 4)

3.Apply pressure at the top edge to bond the screens together.

4.Reverse the Screen Removal procedure and insert the screens in the Screen Frame Assembly.

Figure 4: Installing the Fresnel Lens & Lenticular Screen

*X INCHES - refer to the Tape Length in the table below

MODEL	SCREEN SIZE	TAPE LENGTH
WD-52527	55 inch	46.3 inches
WD-52528	55 inch	"
WD-62527	65 inch	55.1 inches
WD-62528	65 inch	"

Page 24