Mitsubishi Electronics WS-55517 NetCommand Controlled Recordings, Record To Setup, Recording Now

Page 50

NetCommand® Controlled Recordings

Record To Setup

Figure 8

Your TV is able to start and stop recordings automatically and send the signals from one external playback device to another external recording device. It is also able to convert digital channels and IEEE 1394 device signals to analog signals that can be recorded on NetCommand compatible analog VHS and S-VHS VCRs. You cannot record from an analog channel or device or a VHS or S-VHS VCR to a digital recording device such as a DVCR or A/V Disc.

You can schedule the recording to take place at a later time and program the recording duration for a minimum of 30 minutes and a maximum of 6 hours (in 30 minute increments). The default is 1 hour.

When a digital recording is being made, the TV will direct the signals to the recording device using the IEEE 1394 cable. When an analog recording is being made, the TV will direct signals to the recording device.

During a recording, the TV can be powered Off. If the TV is powered On, it must be tuned to the source that is being recorded.

Figure 8. Record to screen

Copy-Protected Material

When attempting to record copy-protected material, the Record functions of the NetCommand and IEEE 1394 systems may be prevented or stopped. If you have a recording that is tagged “Record Once”, NetCommand will change the tag to “Record No More”.

Recording Now

Can be used when viewing Antenna 1 or 2, an IEEE 1394 device, or a non-recording traditional device.

To initiate recording now:

1.Press REC (record) on the TV remote.

2.Press DEVICE on the remote control to move to the Source Device section.

3.Press ADJUST or to select the source device you will record from.

4.Press ENTER to confirm selection and return to the “Record to” section.

5.In the “Record to” section, review the destination device (VCR) and duration. Change if necessary.

6.Press REC a second time to initiate recording.

Time-Delayed Recording

To initiate a time-delayed recording:

1.Press REC (record) on the TV remote.

2.Press DEVICE on the remote control to move to the Source Device section.

3.Press ADJUST or to select the source device you will record from.

4.Press ENTER to confirm your Record from selection and move to the Record to section.

5.Press ADJUST or to select the Record to device, duration time, start time (press ENTER after selecting hour, minutes and AM or PM to set the time) and day. For devices that can select channels, select the channel.

6.Select Add and press ENTER to add the recording to the record list. If your selection is successful, a confirmation message will be displayed. If you pick overlapping times, day(s), or destination devices, you will see a message stating there is a conflict.

7.To exit, press HOME after all recordings have been added.

50

Page 49 Page 51
Image 50
Page 49 Page 51
Contents Projection Television Owner’s Guide Risk of Electric Shock Do not Open Contents Important Safeguards Important SAFEGUARDS, cont’d Our Thanks Mitsubishi Digital Electronics America, IncTelevision Overview Back Panel Important NotesTV Accessories Special FeaturesFront Control Panel POWER/TIMER IndicatorReset Procedure IeeeDigital Audio Output Back PanelIEEE-1394 Input/Output Hdmi or DVI Devices IR Output-NetCommandCableCARD Slot DVI Analog AudioNews and stock-market report bars Letterbox top/bottom black barsSide bar images Shopping channel logos & pricing displaysReceiver or Stereo System ConnectingIR Emitter NetCommand Ieee 1394 Devices DVD Player with Component Video DVI Device Hdmi DeviceConnecting External Devices & NetCommand Setup Stereo and digital audio cables ReceiverConnecting a Wall Outlet Cable or Cable Box Cable BoxFor antennas with twin flat lead For antennas with coaxial leadVCR to Antenna or Wall Outlet Cable TV back panelConnecting VCR Video and Audio to a Cable Box VCR to a Cable BoxSatellite Receiver or Other Device with S-Video TV back panelConnecting a DVD Player with Component Video or DVI Device DVD Player with Component VideoExternal DTV Receiver with Component Video Cable compatibilityConnecting the IR Emitter NetCommand IR Emitter NetCommandConnecting Ieee 1394 Devices Pin Style vs -Pin StyleDirect Device-To-Device Style Ieee 1394 Device Connection StylesConnection Styles Hub Connection StyleCableCARD Technology Using a CableCARDCableCARD Definition and Initial Screen Display Connecting Helpful Hints NetCommand Setup and Editing NetCommand Pre-Memorized Devices DeviceRemote Control Functions Overview FollowingOperation Installing the BatteriesCare NetCommand On-Screen Buttons Remote Control Buttons 3D Graphical Menu SystemDevice Setup Screen NetCommand Initial SetupNetCommand Information Screen Welcome ScreenReview Screen Finish ScreenReceiver Inputs Edit NetCommand, Adding an A/V ReceiverReceiver Screen Receiver Input Learn Screen Receiver Learn ScreenName Screen Monitor Out to AVR ScreenEdit NetCommand, Adding Devices Add Screen Device ScreenDevice Learn Screen Device Advanced Learn ScreenRF Connection for Cable Screen Connection for Device ScreenVCR for Recordings Screen IR Code for Device ScreenChange Screen Delete ScreenDevice Selection Menu IR Controlled Devices/IEEE 1394 Menus Using the Device Menu Button to Display MenusDevice Menu CableCARD MenuIeee 1394 Devices and NetCommand Controlled Recordings New 1394 Device Screen Adding Ieee 1394 Devices AutomaticallyAdding Ieee 1394 Devices Automatically Name for 1394 Device ScreenIeee 1394 Device Type Screen Connection ScreenDigital Control Signal Digital Video SignalsDigital Audio Signals Ieee 1394 Devices CompatibilityDevices 1394 or IR Controlled Using the Guide Button to Display ChannelView and MenusGuide Button ChannelViewTime-Delayed Recording NetCommand Controlled RecordingsRecord To Setup Copy-Protected MaterialTrack List Screen Cancel Current RecordingsRecord List Screen Disc SearchRestrictions for Traditional VCRs Direct VCR RecordingDirect VCR Recording from an Antenna or Cable Source Setting up a Peer-to-Peer Connection NetCommand Controlled Peer-to-Peer ConnectionsWhat is a Peer-to-Peer Connection? Canceling a Current Peer-to-Peer ConnectionImportant Notes TV Menu Screen Operations Main Menu Choices Setup Menu Reset Factory Defaults Menu Advanced ConvergenceDefault Digital Record Device NetCommand MenuRemote Control Transport Buttons Transport MenuPrefer Digital Antenna MenuMemorize ChannelSQV SuperQuickView Time Menu Setting the ClockTimer On/Off ManualAnalog Captions Digital SettingsCaptions Menu Digital CaptionsColor FontsSize Opacity FontEntry Chip Lock MenuChip Chip Start Time and V-Chip Stop TimeTV Ratings Chip Signal InformationContent Categories Lock By Time Front Button LockAudioVideo Menu AudioVideoAnalog Only Audio Settings Setting DescriptionsAnalog and Digital Audio Setting Digital Only Audio SettingsVideo Settings Using the Video Button on the Remote ControlChapter Format Definitions Format SignalsDisplay Formats DVD DefinitionsOriginal Signal Operation of PIP and POP Changing PIP/POP DeviceDevice Menu with Net Command Ieee 1394 Devices Digital Bypassing Front Button Lock Appendix a Bypassing the V-Chip LockBypassing the V-Chip Lock This page intentionally blank Component-1 and Component-2 Inputs Input Levels and Timing with Component Video SignalsAppendix B High Definition Input Connection Compatibility Appendix CRemote Control Programming Codes Programming the Remote to Control NetCommand A/V ProductsAppendix C Remote Control Programming Codes DVD PlayersMitsubishi A/V Receivers Cable Boxes and Satellite ReceiversReceivers Mitsubishi CD Players Not all functions for all modelsAppendix D On Screen Information Displays Appendix E NetCommand Specialized Device Keys Checkbox NameAppendix F Cleaning and Service For the WS-55517 and WS-65517 For additional assistance, call 800Appendix G, Diamond Shield Installation for Model WS-73517 For additional assistance, callFor Mitsubishi Dealers and Service Personnel Only Appendix H Cabinet Separation for Models WS-65517, WS-73517Troubleshooting Problem Possible SolutionTroubleshooting Troubleshooting Using The System Reset Button Demo Mode Additional InformationIndex Menu 56 Mitsubishi Projection TV Limited Warranty Mitsubishi Projection Television Limited WarrantyMitsubishi TV Software Page Page Mitsubishi Digital Electronics America, Inc 871D448A10
Top Page Image Contents