AudioVideo Menu
AudioVideo
Figure 26
Figure 26. Audio/Video Menu, Settings
A/V Memory Reset
Use A/V Memory Reset to select the device that you want to return to the original factory Audio and Video settings. After selecting the device, press ENTER and the device’s A/V memory will be reset.
Settings
Every device has its own A/V memory that can be individually adjusted, through the menu or with the remote. To adjust the settings through the menu, select the device in A/V Memory Reset, then select Audio or Video. Press ENTER, to remove the menu and display the individual settings. Press ADJUST 
or 
to select the setting. Press ADJUST 
or 
to make the adjustment. To adjust the settings with the remote, select Audio or Video on the remote and you can adjust the settings for the device currently being viewed.
For descriptions of the individual A/V settings see A/V Setting Descriptions, pages 69 and 70.
Video Mute
Select On to display a blue background when no signal is being received. This feature is applicable to all inputs, except
Black Enhancement
Select On to enhance the contrast in dark scenes for better picture quality. Brighter scenes will not be affected.
TV Speakers
Select On to use the TV’s internal speakers. Select Off when sending the sound through a separate stereo system or surround sound A/V receiver. When NetCommand® is enabled, selecting the A/V Receiver icon from the Device Selection menu automatically turns Off the TV speakers. See the NetCommand menus for further instructions.
Note: To prevent damage from a sudden increase in volume, make sure the TV volume is set to low before setting speakers to On.
68