NetCommand® Controlled Recordings, continued
Record List Screen
Figure 9
To see a list of all currently programmed recordings, press GUIDE while viewing the Record To screen. A maximum of 32 recordings can be scheduled. To cancel a recording on the Record List, press ADJUST 
or 
to select the recording, then press CANCEL. To page through the list, press CH 
or 
.
Track List Screen
Figure 10
When viewing an A/V Disc, press GUIDE to display its Track List. The time and date it was added, the duration and title will be displayed. Tracks will be listed in date and time order with the most recent recording listed first, and will vary in size. Press ADJUST 
or 
to navigate through the Track List. To play a track, select it on the list, then press ENTER. To change pages, press CH 
or 
. To delete a track, select it on the list and press CANCEL.
Figure 9. Record List screen
Figure 10. Track List screen
Cancel Current Recordings
To cancel a recording in progress, press DEVICE to display the Device Selection menu and highlight the source of the recording. Confirm that the icon for VCR (or recording device) is in the Connection Section next to the TV icon. Press the CANCEL button. The icon for the VCR (or recording device) will disappear from the Connection Section to confirm the cancellation.
A/V Disc Search
NetCommand is able to search to a specific time in a recording on an IEEE 1394 A/V Disc.
1.Start the playback of the desired track on the A/V disc.
2.Use the number buttons to enter the time code position of hours followed by minutes. For example, to enter one hour and
3.Press ENTER to skip to the time code position.
4.To cancel the request or to start over, press CANCEL instead of ENTER.
51