Main Menu Choices
Setup
Figure 1
Use the Setup menu to select English or Spanish as the language for the menus and
Time
Figure 4
Set the TV’s clock manually or automaticallly for your time zone, including Daylight Savings Time, if applicable. If Auto is selected, the TV will set the time based upon Extended Data Service (XDS) time data. This time data is usually broadcast by your local PBS station. This menu is also used to set the TV timer.
Figure 1. Main menu, Setup selected
NetCommand
Figure 2
Add, change, review or delete NetCommand® settings and devices. Start or restart the initial NetCommand setup. If more than one digital recording device is connected, use this menu to change the default digital Record To device. Turn the transport menu off and change the order of the icons in the Device Selection menu.
Figure 4. Main menu, Time selected
Captions
Figure 5
Within broadcaster set parameters, display and customize closed captions, including background and appearance. Analog and digital captions are set separately.
Figure 5. Main menu, Captions selected
Figure 2. Main menu, NetCommand selected
Antenna
Figure 3
Memorize available analog and digital channels for
Figure 3. Main menu, Antenna selected
V-Chip Lock
Figure 6
Block or allow programing based upon rating signals sent by the broadcast station, lock by time, or lock the front panel buttons.
Figure 6. Main menu, V-Chip Lock selected
Audio/Video
Figure 7
Reset the A/V Memory to return to the original factory A/V settings for a selected device. Customize the individual audio and video settings. Display a blue screen when viewing a device with no signal, enhance the darker parts of bright pictures or turn the TV speakers On or Off.
Figure 7. Main menu, Audio/Video selected
56