Mitsubishi Electronics WS-55517 Appendix H Cabinet Separation for Models WS-65517, WS-73517

Page 88

Appendix H: Cabinet Separation for Models WS-65517, WS-73517

For Mitsubishi Dealers and Service Personnel Only

The cabinets for Mitsubishi projection television models WS-65517 and WS-73517 have been assembled in two pieces. These pieces may be separated to allow for easier delivery and setup. To safely separate and reattach the cabinet, follow the instructions below.

This projection television weighs over 320 pounds and has many sensitive components. Any dismantling procedure should be done by authorized Mitsubishi Dealers or Service Personnel ONLY.

2

Speaker

Grille

Connectors (CC, ZF)

3

Plastic

Covers,

Screws

1

The following operations should be performed by two people:

1.Remove the decorative Plastic Covers (2 or 4) on each side of the cabinet and then remove the exposed screws (2 or 4) on each side.

2.Remove the Speaker Grille by pulling straight off the cabinet.

3.Disconnect the connectors.

4.Carefully lift the Cabinet-Top straight up until the brackets are clear from the Cabinet-Bottom. DO NOT

use the Screen Frame bottom when lifting the Cabinet-Top.

5.Carefully place the Cabinet-Top on to the floor.

6.Once you have moved and positioned the Cabinet-Bottom to its desired location, reverse the procedure and mount the Cabinet-Top on the Cabinet-Bottom. Be sure you align the brackets properly. Keep fingers clear of all joints! Replace the screws and the decorative Plastic Covers that were removed in Step 1.

Cabinet-Top

6

Screen Frame

4

Brackets
Cabinet-Bottom	Plastic
Cabinet-Bottom	Covers

88

Image 88

Contents Projection Television Owner’s Guide Risk of Electric Shock Do not Open Contents Important Safeguards Important SAFEGUARDS, cont’d Our Thanks Mitsubishi Digital Electronics America, IncTelevision Overview Back Panel Important NotesTV Accessories Special FeaturesPOWER/TIMER Indicator Reset ProcedureFront Control Panel IeeeIEEE-1394 Input/Output Back PanelDigital Audio Output IR Output-NetCommand CableCARD SlotHdmi or DVI Devices DVI Analog AudioLetterbox top/bottom black bars Side bar imagesNews and stock-market report bars Shopping channel logos & pricing displaysConnecting IR Emitter NetCommand Ieee 1394 DevicesReceiver or Stereo System DVD Player with Component Video DVI Device Hdmi DeviceConnecting External Devices & NetCommand Setup Stereo and digital audio cables ReceiverConnecting a Wall Outlet Cable or Cable Box Cable BoxFor antennas with twin flat lead For antennas with coaxial leadVCR to Antenna or Wall Outlet Cable TV back panelConnecting VCR Video and Audio to a Cable Box VCR to a Cable BoxSatellite Receiver or Other Device with S-Video TV back panelConnecting a DVD Player with Component Video or DVI Device DVD Player with Component VideoExternal DTV Receiver with Component Video Cable compatibilityConnecting the IR Emitter NetCommand IR Emitter NetCommandConnecting Ieee 1394 Devices Pin Style vs -Pin StyleIeee 1394 Device Connection Styles Connection StylesDirect Device-To-Device Style Hub Connection StyleCableCARD Definition and Initial Screen Display Using a CableCARDCableCARD Technology Connecting Helpful Hints NetCommand Setup and Editing NetCommand Pre-Memorized Devices DeviceRemote Control Functions Overview FollowingCare Installing the BatteriesOperation NetCommand On-Screen Buttons Remote Control Buttons 3D Graphical Menu SystemNetCommand Initial Setup NetCommand Information ScreenDevice Setup Screen Welcome ScreenReview Screen Finish ScreenReceiver Screen Edit NetCommand, Adding an A/V ReceiverReceiver Inputs Receiver Input Learn Screen Receiver Learn ScreenName Screen Monitor Out to AVR ScreenEdit NetCommand, Adding Devices Add Screen Device ScreenDevice Learn Screen Device Advanced Learn ScreenConnection for Device Screen VCR for Recordings ScreenRF Connection for Cable Screen IR Code for Device ScreenChange Screen Delete ScreenDevice Selection Menu Using the Device Menu Button to Display Menus Device MenuIR Controlled Devices/IEEE 1394 Menus CableCARD MenuIeee 1394 Devices and NetCommand Controlled Recordings Adding Ieee 1394 Devices Automatically Adding Ieee 1394 Devices AutomaticallyNew 1394 Device Screen Name for 1394 Device ScreenIeee 1394 Device Type Screen Connection ScreenDigital Video Signals Digital Audio SignalsDigital Control Signal Ieee 1394 Devices CompatibilityUsing the Guide Button to Display ChannelView and Menus Guide ButtonDevices 1394 or IR Controlled ChannelViewNetCommand Controlled Recordings Record To SetupTime-Delayed Recording Copy-Protected MaterialCancel Current Recordings Record List ScreenTrack List Screen Disc SearchDirect VCR Recording from an Antenna or Cable Source Direct VCR RecordingRestrictions for Traditional VCRs NetCommand Controlled Peer-to-Peer Connections What is a Peer-to-Peer Connection?Setting up a Peer-to-Peer Connection Canceling a Current Peer-to-Peer ConnectionImportant Notes TV Menu Screen Operations Main Menu Choices Setup Menu Reset Factory Defaults Menu Advanced ConvergenceNetCommand Menu Remote Control Transport ButtonsDefault Digital Record Device Transport MenuAntenna Menu MemorizePrefer Digital ChannelSQV SuperQuickView Setting the Clock Timer On/OffTime Menu ManualDigital Settings Captions MenuAnalog Captions Digital CaptionsFonts SizeColor Opacity FontChip Lock Menu ChipEntry Chip Start Time and V-Chip Stop TimeContent Categories Chip Signal InformationTV Ratings Lock By Time Front Button LockAudioVideo Menu AudioVideoSetting Descriptions Analog and Digital Audio SettingAnalog Only Audio Settings Digital Only Audio SettingsVideo Settings Using the Video Button on the Remote ControlChapter Format Signals Display FormatsFormat Definitions DVD DefinitionsOriginal Signal Operation of PIP and POP Changing PIP/POP DeviceDevice Menu with Net Command Ieee 1394 Devices Digital Bypassing the V-Chip Lock Appendix a Bypassing the V-Chip LockBypassing Front Button Lock This page intentionally blank Appendix B High Definition Input Connection Compatibility Input Levels and Timing with Component Video SignalsComponent-1 and Component-2 Inputs Appendix CRemote Control Programming Codes Programming the Remote to Control NetCommand A/V ProductsAppendix C Remote Control Programming Codes DVD PlayersCable Boxes and Satellite Receivers ReceiversMitsubishi A/V Receivers Mitsubishi CD Players Not all functions for all modelsAppendix D On Screen Information Displays Appendix E NetCommand Specialized Device Keys Checkbox NameAppendix F Cleaning and Service For the WS-55517 and WS-65517 For additional assistance, call 800Appendix G, Diamond Shield Installation for Model WS-73517 For additional assistance, callFor Mitsubishi Dealers and Service Personnel Only Appendix H Cabinet Separation for Models WS-65517, WS-73517Troubleshooting Problem Possible SolutionTroubleshooting Troubleshooting Using The System Reset Button Demo Mode Additional InformationIndex Menu 56 Mitsubishi Projection TV Limited Warranty Mitsubishi Projection Television Limited WarrantyMitsubishi TV Software Page Page Mitsubishi Digital Electronics America, Inc 871D448A10