Epson LVP-X200A user manual Basic connections, Projector + AV equipment, Cables and adapters

ENGLISH

Basic connections

This projector can be connected to equipment such as VCRs, video cameras, videodisc players, and personal comput- ers having analog RGB input.

Important:

•Make sure that your equipment is turned off before connection.

•Match the color of video and audio plugs on the AV cable with each terminal.

•Plug in firmly and unplug by holding the plug, not by pulling the cable out.

•If connected units are set too close to one another, the image may be affected. Setting connected units too close to one another affects the image.

•Refer to the owner's guide of each component for details of connections, .

Projector + AV equipment

Make sure that your equipment is turned off before connection.

Important:

S-video signals take priority over video signals. If you input both S-video signals and normal video signals at the same time, the normal video input automatically shuts off.

to audio input 1

to video input 1

to audio input 2

to S-video input 2

to video input 2

RCA/BNC adaptor

to audio	to video	to audio to S-video	to video
output	output	output output	output

Connect either one of these.

Projector + DVD player

Some DVD players have output terminal for 3 line fitting (Y, CB, CR). When connecting them to the projector, connect to RGB-1 or RGB-2 of the projector. In this case, set “Y, CB, CR” for RGB/Y, CB, CR setting in SIGNAL SETTING MENU.

DVD player

Y	CB		CR
R	G	B		No connection

HD/CS	VD	to RGB 1 IN
		or RGB 2 IN

VCR, others DVD player, others

•Use mini D-SUB 15 pin-BNC conversion cable for connection.

•Some DVD player may not project the image correctly.

Cables and adapters

To connect personal computers to this projector, the following cables and adapters are necessary. The overview might be different from the picture below.

RGB cables (mini D-SUB 15P plug)

	PIN NO.	PIN NO.
	1	1
	2	2
.	3	3
MINI D-SUB 15P	13	13	MINI D-SUB 15P
	14	14
	15	15

Note: The pins numbered 5, 9, 12 and 15 are not connected.

RGB Conversion adapter for MAC (mini D-SUB 15P plug - D-SUB 15P plug)

RGB Conversion adapter for NEC PC (Option)

(mini D-SUB 15P plug - D-SUB 15P plug)

	PIN NO.	PIN NO.
	1	1
	2	3
	3	5
	5	8
	6	2
	7	4
MINI D-SUB 15P	8	6	D-SUB15P
	10	12
	13	14
	14	15
	SHELL	SHELL

1 2	ON
3
4
5
6	DIP

MINI D-SUB 15P

Note: Set the dip switch to the appropriate position.

	Display	Resolution				Dip switch
	mode	640 ⋅			1	2	3	4	5	6
	13 inch			480	ON	ON OFF OFF OFF OFF
	16 inch	832 ⋅	⋅	624	OFF ON OFF ON OFF OFF
D-SUB15P	% 19 inch	1024		768	OFF ON		ON OFF OFF OFF
	21 inch	1152	⋅	870	ON	ON	ON	ON OFF OFF

12