Epson LVP-X200A user manual Option, Ver

UOPTION

	MOTION	SQUEEZE	MENU		AUTO	REMOTE	VIDEO	RGB	LANGUAGE
	/STILL		POSITION	POWER OFF		POSITION	SIGNAL	OUTPUT
						AUTO	AUTO
	MOTION	ON	1	ON	5 min.		NTSC	AUTO	English
	STILL	OFF				FRONT	PAL	RGB1	Español
			2	OFF			SECAM	RGB2	Deutsch
						4.43NTSC			Français
							PAL-M		Italiano
						REAR	PAL-N
SIGNAL	PICTURE	PinP/	PC CARD		AUDIO	INSTALLATION	OPTION		Ver.
		EXPAND	AUTO PLAY

MOTION/STILL . Select MOTION when motion images are mainly projected. Select STILL when still images such as PC-CARD images are mainly projected. It works only when inputting personal computers of SXGA signals or inputting video signal.

SQUEEZE ........... Set to switch the normal image (4:3) and HDTV (16:9) automatically or not, depending on the

image signals.

MENU POSITION . Use to select the position where the menu is displayed (top or bottom on the screen).

AUTO POWER OFF .. Use to select the length of time before the projector switches to standby when there is no input signal selected source. Select OFF to cancel this function.

REMOTE POSITION Select either FRONT or REAR to receive the infrared signal from the remote control. Select AUTO for normal setting.

Note: When the remote position is changed with AUTO setting, the buttons cannot be operated for about 3 seconds.

SIGNAL .............. When AUTO is set, the appropriate video standard is automatically selected according to the

input signal. If the image does not appear correctly, select the desired video standard manually. Adjust the unit to the appropriate format when the unit either is not projecting normally in auto mode or is inputting PAL-M/PAL-N signals.

RGB OUTPUT .... Use to select the output image from the personal computer terminal (RGB OUT). When

selecting AUTO, the terminal images which signals are input are projected. When a video signal or PC card is displayed, the unit will project the image sent from the PC input terminal last displayed.

LANGUAGE ....... Use to select the language for the projector display such as menu.

UVer.

						Ver. 3.3
SIGNAL	PICTURE	PinP/	PC CARD	AUDIO	INSTALLATION	OPTION	Ver.
		EXPAND	AUTO PLAY

Ver Displays the version of the installed software.

ENGLISH

21