Indicators
The projector has three indicators each of which shows the working condition of the projector.
The following offers solutions to possible problems. If a problem persists, turn the projector off and consult your dealer.
ENGLISH
LAMP TEMP
RGB VIDEO
INDICATOR | SHOWS | CONDITION | POSSIBLE SOLUTIONS | |
|
| • Unusual temperature |
| |
|
| The power is turned off |
| |
|
| and the POWER indicator |
| |
|
| lights up red. |
| |
|
| • The ventilation slots or air | • Remove the object from | |
|
| filter is clogged with dust | the ventilation slot. | |
TEMP |
| or debris. |
| |
blinking red | • The fan has stopped due | • Pull out the power | ||
INDICATOR | ||||
| to an impediment. | plug and remove the | ||
|
|
| object. If you cannot, | |
|
| • The location temperature | consult your dealer. | |
|
| • Relocate the projector | ||
|
| is too high. | to a cooler place. | |
|
| • The filter is dirty. | • Clean the filter. | |
|
|
|
| |
| Steady green | Normal | - | |
|
| |||
|
|
|
| |
| Blinking red/green | Lamp is almost used up. |
| |
LAMP | or Blinking red |
| Replace the lamp. | |
|
| |||
INDICATOR |
| • Lamp is used up. | Exchange with a new | |
| Steady red | lamp if the same | ||
|
| |||
|
| • The power is not turned on. | problem recurs. | |
|
| (Power indicator lights up red.) |
| |
|
|
|
| |
| Steady red | Standby | - | |
|
|
|
| |
| Steady green | - | ||
|
|
|
| |
POWER |
| • The filter cover is not closed. | • Close the cover cor- | |
INDICATOR | Blinking red/green | (When the TEMP indicator and | rectly. | |
| or Blinking red | the LAMP indicator are off.) |
| |
| • Abnormal | • Contact your dealer. | ||
|
| |||
|
| (When the TEMP indicator |
| |
|
| or the LAMP indicator |
| |
|
| steady on or blinking.) |
| |
|
|
|
|
44