Eiki EIP-3500 owner manual Confirming the Network In- formation for the Projector

Page 65

Confirming the Network In- formation for the Projector

You can confirm the projector name, IP address and MAC address.

Menu operation Page 42

Example: “Options2” screen menu

Description of Network Information

	Displayed items	Description
	Projector	The projector name is displayed.
	Projector	(Factory preset : EIP-3500)
		(Factory preset : EIP-3500)
		The IP address set for the projector is
	IP Address	displayed.
		(Factory preset :192.168.150.2)
	MAC Address	The MAC address of the projector is
	MAC Address	displayed.

Note

•For information on how to change the projector name and IP address, see “SETUP GUIDE” contained in the supplied CD-ROM.

Returning to the Default Settings

This function allows you to initialize the settings you have made in the projector.

Menu operation Page 42

Example: “Options2” screen menu

Note

About the network settings

•“Projector” and “IP Address” on the “Options2” menu and the network setting items described on the “SETUP GUIDE” are initialized.

The following items or menu cannot be initialized.

•“Fine Sync” menu Special Modes

•“Options1” menu Lamp Timer (Life) System Lock

•“Language” menu

61

Image 65

Contents EIP-3500 Model No. EIP-3500 Serial No Special Note for Users in the U.K Page Introduction Product Disposal Operation Buttons used in thisContents Reference Important Safeguards Do not block the intake and exhaust vents Rest your eyes occasionallyAvoid locations with extremes of tem- perature Other connected equipment Using the projector in other countriesTemperature monitor function Setup Guide Optional accessory AccessoriesSupplied accessories Projector Part Names and FunctionsLamp indicator About the Indicators on the ProjectorTerminals Projector Rear ViewCLICK/ENTER button 24·40 Remote ControlUsable Range Using the Remote ControlInserting the Batteries Insert the batteriesQuick Start Setup and ProjectionAdjust the angle Pocket of the storage case Close the cover of the storageCase Setting up the Projector Setting up the ProjectorProjection from behind the Screen Projecting a Reversed ImageINPUT/OUTPUT Terminals and Connectable Main Equipment ConnectionsAudio Input Samples of Cables for ConnectionSupplied Accessories Connecting to a ComputerUsing the Remote Control as the Wireless Computer Mouse Supplied Accessory Connecting to Video EquipmentWhen connecting video equipment with S-video output terminal When connecting video equipment with video output terminalControlling the Projector by a Computer When connecting to the LAN terminal using a LAN cableConnecting to an Amplifier or Other Audio Equipment Connecting to a Monitor with RGB Input TerminalTurning the Power off Putting Connecting the Power CordTurning the Projector On/Off Turning the Projector onHeight Adjust button Using the Adjustment FeetRear adjustment feet Image ProjectionPress Correcting Trapezoidal DistortionKeystone button Undo buttonAdjusting the Projected Image Size Adjusting the FocusPress on the projector or on the remote control Focus buttons Zoom buttons Auto Focus buttonAdjusting the Volume Switching the Input ModeVolume buttons Input buttonsPress on the remote control to cancel the operation Press on the remote controlDisplaying an Enlarged Portion of an Image AV Mute buttonSwitching the High Brightness/High Contrast Mode Selecting the Picture ModeFreeze button Undo button Picture Mode button Iris button Freezing a Moving ImageMOUSE/Adjustment Resize ModeButton //\ Undo button Resize buttonVideo Following shows the items that can be set in the projector When using the Input 1 or Input 2 modeMenu Items Options1 menu Menu Selections Adjustments Using the Menu ScreenExample Adjusting Bright Example Picture screen menu for Input 1 RGB mode Menu iconsPress or to select the item you want to adjust To adjust the pro- jected image while viewing itPress \ or to adjust the item selected Single adjustment itemsExample Setting Menu Position Menu Selections SettingsSub menu Adjusting the Image Picture Adjustment Picture menuEmphasizing the Contrast Adjusting the Color TemperatureSwitching the High Bright- ness/High Contrast Mode SRGB SettingExample Picture screen menu for IN- PUT 1 RGB mode Description of Iris SettingsRGB Signal Type SettingAdjusting the Computer Image Computer Image Adjustment Fine Sync menuSpecial Modes Setting Example Fine Sync screen menu for Input 1 RGB modeChecking the Input Signal Auto Sync AdjustmentChecking the Lamp Life Status Using the Options1 MenuSetting the Resize Mode Setting the Video System Setting On-screen DisplaySelecting a Startup and Background Image Eco ModeSelecting the Menu Screen Position Auto Power Off FunctionWhen the System Lock is set Example Options1 screen menu for Input 1 RGB modeSystem Lock Function Select System Lock on the Op Tions1 menu, then pressChanging the keycode When System Lock is set Example Options2 screen menu Setting a PasswordIf You Forget Your Password Auto Keystone Setting Auto Focus SettingExample Options2 screen menu Description of Auto Focus Example Options2 screen menu Description of Auto KeystoneSetting the Audio Output Type Speaker SettingSelecting the Transmis- sion Speed RS-232C Reversing/Inverting Pro- jected ImagesExample Options2 screen menu Description of PRJ Modes Example Options2 screen menu Description of RS-232CLAN/RS232C Setting Monitor Output SettingsExample Options2 screen menu Description of Monitor Out Description of LAN/RS232CConfirming the Network In- formation for the Projector Selecting the On-screen Display Language Using the Language MenuPress \ or to select the Lan- guage menu icon Press or to select the desired Language, and then pressCleaning the projector MaintenanceCleaning the lens Cleaning the exhaust and intake ventsAbout the lamp indicator Maintenance IndicatorsAbout the temperature warning indicator Abnormal Regarding the Lamp Remove the lamp unit cover Removing and Installing the Lamp UnitDisconnect the power cord Resetting the Lamp Timer Computer Computer Compatibility ChartRemote control batteries have run out TroubleshootingInput 2 RGB NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM SpecificationsGlossary 32,57 IndexEastern Europe CanadaDeutschland & Österreich Japan & Worldwide