Image Projection
Adjusting the Focus
This projector is equipped with an “Auto Focus” function that adjusts the focus automatically when it is turned on. When you want to readjust the focus after the Auto Focus function has been activated, you can operate the Auto Focus func- tion using the following procedure.
Press 
on the projector or on the remote control.
•The focus is adjusted automatically after the focus pattern is displayed, and the focus pat- tern disappears from the screen.
Note
•Auto Focus can be performed over a range of 40 to 100 inches.
•The ability to adjust the focus automatically depends on the screen conditions and the surrounding brightness.
•Adjust the focus manually when the focus is not adjusted with Auto Focus or when you want to make fine adjustments.
When adjusting the focus using the buttons
on the projector |
| on the remote control |
1 Press | . | Adjust by pressing the |
FOCUS buttons. 2 Adjust by pressing
\ or .
•When not using the Auto Focus function, set “Auto Focus” on the “Options2” menu to “
” (OFF).
ZOOM-FOCUS
Adjustment buttons ('/"/\/)
AUTO FOCUS button
Auto focus sensor
Auto focus may not function normally if there is an obstruction between the auto focus sensor and the screen, or if there is dirt or dust on the auto focus sensor. Remove any obstructions, dirt or dust.
FOCUS buttons
ZOOM buttons
AUTO FOCUS button
Adjusting the Projected Image Size
When adjusting zoom using the buttons
on the projector | on the remote control |
1 Press 
. Adjust by pressing the ZOOM buttons.
2 Adjust by pressing
'or ".
Note
•Manually adjusting the focus or zoom After you have pressed the FOCUS buttons or ZOOM buttons on the remote control, or after you have pressed the
32