3M X15 manual Connecting power supply

Page 15

Setting up

Connecting power supply

WARNING ►Please use extra caution when connecting the power cord as incorrect or faulty connections may result in ﬁre and/or electrical shock.

•Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one.

•Only plug the power cord into an outlet rated for use with the power cord's speciﬁed voltage range.

•Never modify the power cord. Never attempt to defeat the ground connection of the three-pronged plug.

Before connecting, make sure that the power switch is the OFF position (pressed the side marked “O”).

Power switch	AC inlet
	AC inlet
	Connector of the power cord

1. Connect the connector of the power cord to the AC inlet of the projector.

2. Firmly plug the power cord's plug into the outlet.

15

Image 15

Contents About this manual Thank you for purchasing this projectorTrademark acknowledgment Contents About contents of package Projector featuresProjector Part namesRemote control ControlsMagnify Fastening the lens cover PreparationsPutting batteries Using the remote control About the ﬁlter cover for bottom-up use Setting up Arrangement Adjusting the projectors elevator About Plug-and-Play capability Connecting your devicesExamples of connection with a VCR/DVD player Examples of connection with a computerConnecting power supply Power on/off Turning on the powerSTANDBY/ON Turning off the power Temporarily muting the sound Adjusting the volumeSelecting an input signal Operating At a video signal /no signal 43  Searching an input signalAdjusting the zoom magnifying power Adjusting the focusCorrecting the keystone distortions Using the automatic adjustment featureAdjusting the position  At a RGB signalUsing the partial magnify feature Freezing the screenTemporarily blanking the screen Multifunctional settings Using the menu functionEasy Menu Enter MenuTo reset Mode AspectZoom KeystoneEasy Menu Gamma #1 Default  #1 Custom  #2 Default#3 Custom  #3 Default  #2 Custom Picture menuColor Temp Picture menuHigh  Middle Custom  LOWSAVE4 SAVE3  SAVE2  SAVE1 TV  Film  Turn OFFProgressive LOAD1  LOAD2  LOAD3  LOAD4Position PhaseImage menu Over ScanSize  At a video signalAuto Adjust Image menuVideo Format Input menuColor Space Auto  Ntsc  PAL  SecamInformation Input menuTurn on  Turn OFF Frame LockNormal  Hinvert  Vinvert  H&VINVERT Setup menuVolume Normal  WhisperBlank Screen menuMenu Position OSD BrightScreen menu Start UPMyScreen Sync is OUT of Range MyScreen LockMessage No Input is DetectedAuto OFF Option menuAuto Search RGB  S-VIDEO  VideoReset  Cancel Option menuLamp Time Ghost ServiceFactory Reset FAN SpeedLamp MaintenanceMaintenance Case of replacement by yourselfAir ﬁlter Air ﬁlter Page Related messages Related messages Internal portion temperature is risingRegarding the indicator lamps Regarding the indicator lamps Phenomenon Cases not involving a machine defect Reference Electrical power cord is not pluggedPower switch is not set to the on position These has not been properly ﬁxedPhenomena that may easily be mistaken for machine defects Video input SpeciﬁcationRGB input Communication portSpeciﬁcations Accessories Part Number How to OrderNot included with Basic Packet Part Number DN00822-S15OGENG