Power on/off
Power on/off
Turning on the power
WARNING ►When the power is on, a strong light is emitted. Do not look into the lens or vents of the projector.
NOTE • Turn the power on in right order. Please power on the projector before the connected devices.
|
| STANDBY/ON |
VIDEO | RGB SEARCH |
|
ASPECT | AUTO | BLANK |
MAGNIFY |
| VOLUME |
ON |
|
|
|
| MUTE |
OFF |
|
|
FREEZE |
| KEYSTONE |
| ZOOM | |
| - | + |
POSITION |
| MENU |
| ENTER |
|
ESC |
| RESET |
LAMP | POWER indicator | |
TEMP | ||
| ||
POWER |
| |
INPUT |
| |
STANDBY/ON |
| |
button |
| |
MENU | Power switch | |
STANDBY/ON | ||
|
1. Make sure that the power cord is firmly and correctly connected to the projector and outlet.
2. Open the lens cover, and set the power switch to the ON position.
The power indicator will light to solid orange. Then wait several seconds because buttons may not function for these several seconds.
POWER
(Solid orange)
3. Press the STANDBY/ON button on the projector or remote control.
The projector lamp will light up and the POWER indicator will begin blinking green. When the power is completely on, the indicator will stop blinking and light green.
POWER
(Blinking green)
POWER (Solid green)
To display the picture, select an input signal according to the section "Selecting an input signal" (18).
16