Multifunctional settings
SCREEN menu (continued)
Item
Description
| Using the buttons ▲/▼ switches the mode for the start up screen. | |
| The start up screen is the screen displayed when no signal or an | |
| unsuitable signal is detected. | |
| MyScreen ORIGINAL TURN OFF | |
| MyScreen is the screen you can register a desired screen. | |
START UP | ORIGINAL screen is the existing standard screen. When the TURN | |
OFF is selected, the BLACK screen is used. | ||
| ||
| • To avoid remaining as an afterimage, the MyScreen and the | |
| ORIGINAL screens will change to the BLANK screen after several | |
| minutes. If also the BLANK screen is the MyScreen or ORIGINAL, it | |
| will change to the BLACK screen. | |
| • For the MyScreen, please refer to the item MyScreen below. | |
| About the BLANK screen, please refer to the item BLANK (35). |
This item functions for capturing the MyScreen of the blank screen and the start up screen. Please execute displaying the input including the picture you want to capture.
1. Choosing this item displays a dialog |
|
|
titled “MyScreen”. It will ask you if | Do you start capturing this picture? | |
you start capturing the picture from | ||
| MyScreen |
|
the current screen. Please wait for |
|
|
the target picture to be displayed. | ESC , + :NO | ENTER , :YES |
2.Press the ENTER button when the picture is display. The picture will freeze and the frame for capturing appears.
To stop performing, press the RESET or ESC button.
MyScreen | 3. Using the buttons ◄/►/▲/▼ adjust | MyScreen |
| ||
the frame position. Please move the | Move the capture area | |
| as you want. | |
| frame to the position of the picture | ESC , + :RETURN ENTER , :NEXT |
| which you want to use. | My Screen |
| The frame may not be able to be | 45% |
| moved for some input signals. | |
|
| |
| To start registration, press the |
|
| ENTER button. |
|
To restore the screen and return to the previous dialog, press the RESET or ESC button.
Registration takes several minutes. When the registration is completed, the registered screen and the message “MyScreen registration is finished.” are displayed for several seconds. If the registration failed, the message “A capturing error has occurred. Please try again.” is displayed.
36