3M X15 manual Option menu, Auto Search, RGB  S-VIDEO  Video, Auto OFF

Multifunctional settings

OPTION menu

With the OPTION menu, items shown in the table below can be performed.

Choose an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress, except for the items LAMP TIME and FILTER TIME. Then perform it referring to the following table.

MENU [RGB]		:SELECT
PICTURE	AUTO SEARCH	TURN OFF
IMAGE	AUTO OFF	0
INPUT	LAMP TIME	0
SETUP	FILTER TIME	0
SCREEN	SERVICE
OPTION
EASY MENU

Item

Description

	Using the buttons ▲/▼ turns on/off the automatic signal search
	function.
	TURN ON  TURN OFF
AUTO SEARCH	When the TURN ON is selected, detecting no signal automatically
	cycles through input ports in order of following. Then when an input
	is found, the projector will stop searching and display the image.
	RGB  S-VIDEO  VIDEO
	Using the buttons ▲/▼ adjusts the time to count down to
	automatically turn the projector off.
	Long (max. 99 minutes)  Short (min. 0 minute = DISABLE)
	AUTO OFF	AUTO OFF
	ENABLE	DISABLE
AUTO OFF	10	0
	When the time is set to 0, the projector is not turned off
	automatically.
	When the time is set to 1 to 99, and when the passed time with
	a no-signal or an unsuitable signal reaches at the set time, the
	projector lamp will go off and the power indicator begins blinking.
	Please refer to the section “Turning off the power” (17).

38