3M X15 manual Input menu, Color Space, Auto  Ntsc  PAL  Secam, Video Format

Multifunctional settings

INPUT menu

With the INPUT menu, items shown in the table below can be performed.

Choose an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table.

MENU [RGB]		:SELECT
PICTURE	COLOR SPACE	AUTO
IMAGE	VIDEO FORMAT	AUTO
INPUT	FRAME LOCK	TURN OFF
SETUP	INFORMATION
SCREEN
OPTION
EASY MENU

Item

Description

	Using the buttons ▲/▼ switches the mode for color space.
	AUTO  RGB  SMPTE240  REC709  REC601
COLOR SPACE	• This item can be chosen only at a RGB signal or a component
	video signal.

•The AUTO mode automatically selects the optimum mode.

•The AUTO operation may not work well at some signals. In such a case, it might be good to select a suitable mode except AUTO.

	Using the buttons ▲/▼ switches the mode for video format.
	AUTO  NTSC  PAL  SECAM
	N-PAL  M-PAL  NTSC4.43
	• This item performs only at a video signal from the VIDEO port or
VIDEO FORMAT	the S-VIDEO port. For a component video signal, the signal type is
	identified automatically, independently of this function.

•The AUTO mode automatically selects the optimum mode.

•The AUTO operation may not work well at some signals. If the picture becomes unstable (ex. an irregular picture, a color lack), please select the mode depending on the input signal.

32