3M X15 manual Projector features, About contents of package

Page 3

Projector features / About contents of package

Projector features

This projector is used to project various computer signals as well as NTSC / PAL

/SECAM video signals onto a screen. It requires just a little space for installation and gets a large image from short distance.

High Brightness

Newly developed 165W UHB (Ultra High Brightness) lamp gives you a higher brightness image on a screen. The image can be still kept as bright and clean enough for use in bright rooms.

Low Noise

WHISPER mode is equipped for reducing acoustic noise to realize quieter operation. It is perfect for use in low luminance rooms where low noise is more important than brightness.

Compact Body

Even with its many features, this projector is extremely compact and slim, which gives you more flexibility and usability to use it where you want.

About contents of package

Your projector should come with the items shown below. Contact immediately your dealer if anything is missing.

NOTE • Keep the original packing materials for future reshipment. For moving the projector, be sure to use the original packing material. Use special caution for the lens part.

 

 

- +

Projector

Strap

Remote control

(with Lens cover)

(for Lens cover)

(with two AA batteries)

 

S15/X15

 

VGA cable

Power cord

Operator's Guide

Filter cover

 

(US, UK, EUROPE)

Product SafetyGuide

(for bottom-up use)

 

 

Quick Start Guide

 

 

 

Warranty

 

3

Image 3
Contents About this manual Thank you for purchasing this projectorTrademark acknowledgment Contents About contents of package Projector featuresProjector Part namesRemote control ControlsMagnify Fastening the lens cover PreparationsPutting batteries Using the remote control About the filter cover for bottom-up use Setting up Arrangement Adjusting the projectors elevator About Plug-and-Play capability Connecting your devicesExamples of connection with a VCR/DVD player Examples of connection with a computerConnecting power supply Power on/off Turning on the powerSTANDBY/ON Turning off the power Temporarily muting the sound Adjusting the volumeSelecting an input signal Operating At a video signal /no signal 43  Searching an input signalAdjusting the zoom magnifying power Adjusting the focusCorrecting the keystone distortions Using the automatic adjustment featureAdjusting the position  At a RGB signalUsing the partial magnify feature Freezing the screenTemporarily blanking the screen Multifunctional settings Using the menu functionEasy Menu Enter MenuTo reset Mode AspectZoom KeystoneEasy Menu Gamma #1 Default  #1 Custom  #2 Default#3 Custom  #3 Default  #2 Custom Picture menuColor Temp Picture menuHigh  Middle Custom  LOWSAVE4 SAVE3  SAVE2  SAVE1 TV  Film  Turn OFFProgressive LOAD1  LOAD2  LOAD3  LOAD4Position PhaseImage menu Over ScanSize  At a video signalAuto Adjust Image menuVideo Format Input menuColor Space Auto  Ntsc  PAL  SecamInformation Input menuTurn on  Turn OFF Frame LockNormal  Hinvert  Vinvert  H&VINVERT Setup menuVolume Normal  WhisperBlank Screen menuMenu Position OSD BrightScreen menu Start UPMyScreen Sync is OUT of Range MyScreen LockMessage No Input is DetectedAuto OFF Option menuAuto Search RGB  S-VIDEO  VideoReset  Cancel Option menuLamp Time Ghost ServiceFactory Reset FAN SpeedLamp MaintenanceMaintenance Case of replacement by yourselfAir filter Air filter Page Related messages Related messages Internal portion temperature is risingRegarding the indicator lamps Regarding the indicator lamps Phenomenon Cases not involving a machine defect Reference Electrical power cord is not pluggedPower switch is not set to the on position These has not been properly fixedPhenomena that may easily be mistaken for machine defects Video input SpecificationRGB input Communication portSpecifications Accessories Part Number How to OrderNot included with Basic Packet Part Number DN00822-S15OGENG