3M X15 manual

Page 45
45
After making sure that the projector is cool adequately, lightly wipe with gauze or a soft cloth.
If soiling is severe, dip soft cloth in water or a neutral cleaner dilute in water, and wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.
Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently.
1.
2.
Caring for the cabinet and remote control
Incorrect care could have adverse influence such as discoloration, peeling paint, etc.
After making sure that the projector is cool adequately, lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the lens
directly with your hand.
Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently.
1.
2.
Maintenance
Other care
WARNING ►Do not take care of the projector during use or immediately after use. Handling while the projector is in a high temperature could cause a burn and/ or malfunction to the projector. Before operating, make sure that the power switch is off, that the power cord is not plugged in, and that the projector is cool adequately. ►Never try to care for the inside of the projector personally. Doing is so dangerous.
►Avoid wetting the projector or inserting liquids in the projector. It could result in a fire, an electric shock, and/or malfunction to the projector.
• Don’t put a container containing water, cleaner or chemicals near the projector.
• Don’t use aerosols or sprays.
CAUTION ►Please take right care of the projector according to the following. Incorrect care could cause not only an injury but adverse influence such as discoloration, peeling paint, etc.
• Do not use cleaner or chemicals other than those listed below.
• Do not polish or wipe with hard objects.
Inside of the projector
In order to ensure the safe use of your projector, please have it cleaned and inspected by your dealer about once every year.
Caring for the lens
If the lens is flawed, soiled or fogged, it could cause deterioration of display quality. Please take care of the lens, being cautious of the handling.
Image 45
Contents About this manual Thank you for purchasing this projectorTrademark acknowledgment Contents About contents of package Projector featuresProjector Part namesRemote control ControlsMagnify Fastening the lens cover PreparationsPutting batteries Using the remote control About the filter cover for bottom-up use Setting up Arrangement Adjusting the projectors elevator About Plug-and-Play capability Connecting your devicesExamples of connection with a VCR/DVD player Examples of connection with a computerConnecting power supply Power on/off Turning on the powerSTANDBY/ON Turning off the power Selecting an input signal Adjusting the volumeOperating Temporarily muting the soundAdjusting the zoom magnifying power Searching an input signalAdjusting the focus  At a video signal /no signal 43 Adjusting the position Using the automatic adjustment feature At a RGB signal Correcting the keystone distortionsUsing the partial magnify feature Freezing the screenTemporarily blanking the screen Multifunctional settings Using the menu functionEasy Menu Enter MenuTo reset Zoom AspectKeystone ModeEasy Menu #3 Custom  #3 Default  #2 Custom #1 Default  #1 Custom  #2 DefaultPicture menu GammaHigh  Middle Picture menuCustom  LOW Color TempProgressive TV  Film  Turn OFFLOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1Image menu PhaseOver Scan PositionAuto Adjust  At a video signalImage menu SizeColor Space Input menuAuto  Ntsc  PAL  Secam Video FormatTurn on  Turn OFF Input menuFrame Lock InformationVolume Setup menuNormal  Whisper Normal  Hinvert  Vinvert  H&VINVERTMenu Position Screen menuOSD Bright BlankScreen menu Start UPMyScreen Message MyScreen LockNo Input is Detected Sync is OUT of RangeAuto Search Option menuRGB  S-VIDEO  Video Auto OFFReset  Cancel Option menuLamp Time Factory Reset ServiceFAN Speed GhostLamp MaintenanceMaintenance Case of replacement by yourselfAir filter Air filter Page Related messages Related messages Internal portion temperature is risingRegarding the indicator lamps Regarding the indicator lamps Power switch is not set to the on position Electrical power cord is not pluggedThese has not been properly fixed Phenomenon Cases not involving a machine defect ReferencePhenomena that may easily be mistaken for machine defects RGB input SpecificationCommunication port Video inputSpecifications Accessories Part Number How to OrderNot included with Basic Packet Part Number DN00822-S15OGENG