BenQ PB6240 user manual Advance menu

4. Advance menu

FUNCTION	DESCRIPTION
	The projector can be installed on a ceiling or behind a screen, or with one
Mirror	or more mirrors. Contact your dealer for the ceiling mount bracket
	(optional accessory) if you need to install the projector on your ceiling.
	Refer to page 12 for more information.
Blank Time	Sets the image blank time when the Blank feature is activated, once
	elapsed the image will return to the screen.
	Sets whether the projector searches automatically for input signals. If the
Source Scan	source scan is on ( ), the projector will scan for input signals until it
	acquires a signal. If the function is not activated, the projector selects the
	last used input signal.
	Language sets the language for the OSD control menus.
Language	Use 3 Left/ Right 4on the projector or 3/ 4 on the remote control to
	select your desired language from among English, French, German,
	Italian, Spanish, Russian, Traditional Chinese, Simplified Chinese,
	Japanese and Korean.
User Logo	Enables the user to select which logo screen will appear during projector
	start-up. Three modes are available: Default (BenQ logo), black screen or
	blue screen.
	A mode for extreme environments like high altitude and high tempera-
	ture. We recommend you use the High Altitude Mode when your environ-
	ment is higher than 3000 feet above sea level, and is hotter than 40°C.
	To activate the High Altitude Mode, select		by pressing 3 or 4on the
	projector or remote control. A confirmation message displays. Press Auto.
	We recommend you use the High Altitude Mode by selecting
	when your environment is higher than 3000 feet, and is hotter than 40°C.
	Do you want to turn on High Altitude Mode?
	Yes	No 5
	Next time you turn on the projector, it will show a message pictured below
High Altitude	as a reminder during the start-up.
Mode	Current Status
	High Altitude Mode		On
	This mode is used for protecting projector from extreme environment and may cause high
	fan speed.

Operation under "High Altitude Mode" may cause a higher decibel operating noise level because of increased fan speed necessary to improve overall system cooling and performance.

If you use this projector under other extreme environments excluding the above, it may display auto shut-down symptoms, which is designed to protect your projector from over-heating. In cases like this, you should switch to High Altitude mode to solve these symptoms. However, this is not to state that this projector can operate under any and all harsh or extreme environments.

Operation 29