B. Manual Search
After setting the search parameters like frequency, symbol rate etc., you can find the services manually in the transponder you have selected.
Antenna Alternative
Select the target antenna for manual search. This antenna alternative number is already set in Antenna Setting menu. Antenna alternative 16 is for SMATV.
SMATV Search
In case that several generations use Antenna and LNB in common, as the frequency range of signal is input to IRD is down as much as LNB L.O.(Local Oscillator) frequency, search the service from 950 to 2150MHz.
Frequency
Inputs not RF frequency but the frequency that is down converted through LNB in common. The unit is MHz and the range of input is
Symbol Rate
Inputs the symbol rate of the signal you want to find.
FEC
You can select the value of 1/2, 2/3, 3/4, 5/6, 7/8 or Auto.
LNB Power
As there is whether the LNB power of STB is necessary or not according to the sort of
Satellite Name
It is helpful for selecting the above mentioned antenna alter- native. This has been disabled, it is for reference only and cannot be changed within this menu.
Frequency
Input the frequency of the transponder you want to find manually.
Guide of
Main Menu
move the cursor
select the searching parameters
input the frequency or symbol rate directly
start the manual search return to the previous menu exit from the menu screen
move the cursor
select the searching parameters
input the frequency, symbol rate directly
start the SMATV search return to the previous menu exit from the menu screen
28