Guide of
Main Menu
Automatic Skip
Option to search only
The above picture tries to search with varying frequency, symbol rate and FEC etc.
Note: But, the user should select the satellite name in Antenna Setting menu and when the user inputs the satellite name separately, you should select the Detail mode.
Press the OK key anywhere to start automatic search. The picture during searching is as follows.
The right picture tries to search with varying frequency, symbol rate and FEC etc. Satellite name is the name that the user selects to correspond with antenna alternative of antenna setting. The bar graph that displays on the bottom of picture shows the progress extent with percent (%). During the search, services that are found are displayed as
follows:
1.Press the EXIT key during automatic search to stop search.
2.When finishing search, the message that it is finished appears.
3.Press the OK key to return Service Search menu.
3-4. Satus
A. STB Status
Displays the information of H/W version, S/W version,
Loader version of STB.
B. Signal Detection
Shows the Signal Level (AGC level) and Signal Quality (BER) of the current service and is help to the initial antenna setting.
32