Guide of
Main Menu
move the cursor
go to the selected menu return to the previous menu exit from the menu screen
move the cursor
select LNB frequency or parameters. In Satellite Name, selects the name on the satellite list.
input the LNB frequency directly
go to the manual search menu
return to the previous menu exit from the menu screen
C. Organise Networks
You can edit the service by using the unit of network.
In the above mentioned picture, the network names are displayed on the left side and the TV/Radio services con tained within the highlighted network are displayed on the right side.
When the number of TV/Radio services for the network is too many to be displayed in the window, then move the
cursor to the right window using the | key and move to |
the next list by using the / and | P+/P- keys. |
In the picture(left), you can check what services are available for the current network. The operation of Delete/Move/ Rename is available for network only. When the number of
services is under 10, the 
key is not displayed. In radio service icon is marked in front of service number.
3-3. Service Searching
After inputting the PIN Code 0 0 0 0 , You can enter the Service Searching menu as you enter the Parental Control or Service Organising menu. The bar displayed at the bottom of submenu shows the signal quality(BER) for the parameters entered. After setting the above mentioned parameters, press the OK key to start service search.
A. Antenna Setting
Selects the Antenna and LNB setting conditions for Service search. As you can change the settings for 22KHz tone and DiSEqC switch, there are 16 possible antenna setting for use. The values that are set in this menu will be available for selection in other service searching menus.
Antenna Alternative
There are 16 antenna alternatives, each one can have differ- ent combinations of settings for 22KHz tone and DiSEqC switch.
25