Trouble Shooting Guide
Problem
Solution
Service Search
"No Signal" in manual search
Check the "Signal Strength" and the "Signal Quality" in the Signal Status menu.
Check the LNB - replace LNB if necessary.
Check the cable from the LNB.
Check the position of the dish - relign dish if necessary.
DiSEqC 1.0
Check that you have connected the LNBs to the correct connections on the switch.
Check that you have set the correct settings in the Antenna Setting menu.
DiSEqC 1.2
Check that you have selected this in the Antenna Setting menu.
Check that the dish is aimed at the correct satellite.
| LED Error Message |
|
Amber only | Check wheather the system ID is different for Software and |
|
: Invalid system ID | STB. |
|
|
|
|
Amber & Red | You need to contact your retail shop. |
|
:Incorrect data block CRC error
Amber & Red & Green | You need to contact your retail shop. |
:Incorrect application CRC error
*If you can’t solve the problem even after referring this Trouble Shooting Guide, contact us via our homepage.
Homepage : http://www.humax.co.kr
39