Bodum F1-ACE user manual Data In/Out

Specification

A/V & Data In/Out
VIDEO	: RCA/Cinch
		Video Output(CVBS)
AUDIO R/L	: Cinch volume and Mute Control
		(Resolution : 20bit DAC, max 2 Vrms)
RS232C	: Transfer rate 115,200 bps
		9 pin D-sub Type
RF-Modulator
RF-Connector	:	75 , IEC 169-2, Male/Female
Frequency	:	470MHz to 860MHz
Output Channel	: CH21-69 or CH 28-69 or CH13-62
		for the Remodulator
TV Standard	: PAL B/G/I selectable by Menu
Preset Channel	:	CH36(or TBD).
		Software changeable by Menu
Test Pattern	:	Vertical Black/White Bars
Power Supply
Input Voltage	: 190 to 250V AC, 50/60 Hz
Type	: SMPS
Power Consumption	:	Max. 30W
Standby Power	:	8W
Protection	:	Seperate internal fuse.
		The input shall have lightning Protection
Physical Specification
Size (W x H x D)	: 260 x 50 x 180 mm
Weight (Net)	:	Around 1.3 Kg
Operating Temp	:	0˚C to +45˚C
Storage Temp	:	-10˚C to +70˚C
Storage Humidity	:	5% ~ 95% RH(Non-Condensing)

You can use a special antenna switch with DiSEqC commands.

When changing channel from ASTRA to EUTELSAT for example, a DiSEqC command is sent with the 22KHz tone through the antenna cable.

The antenna switch will change from using ASTRA to EUTELSAT.

The concept of DiSEqC is a protective trademark of EUTELSAT.

Data rate decides the picture quality of digital TV programmes.

Date rate of about 5-6 Mbit/s coincides with the picture quality of a

analog TV programme.

Please note : The specification of the STB may be changed without notice in advance.

4