INSTALLATION AND CONNECTION
4. Connecting & Running WDR-516S
4.1. Connecting camera
(1)Connect CCTV camera to
(2)Set video type (NTSC/PAL) by rear panel’s switch.
<Note>
The video type for all channels should be either NTSC or PAL. NTSC is the standard used in North America.
(3) Set the impedance control switch for each channel as needed.
<Note>
It may be necessary to configure impedance of video input differently for each channel. For more detailed information, please refer to “Video type / impedance setup switch” in Appendix #2.
CAMERA
REMOTE
CONTROL
1 2 3 4 P OFF
| 11 | Rev 1.0(93/11) |