Maxtor manual What is WDR-516S?, Key features

Page 7

OVERVIEW

1. What is WDR-516S?

The WDR-516S is a 4-Analog, 12-IP channel network digital video recorder. The WDR-516S can record and display 4 analog video channels and 12 IP video channels simultaneously. Video, Audio, and Text Event-Logs are digitized and stored on two internal hard-drives.

Key features

Expandable up to 16 channels (4 analog video channels + 12 IP video channels)

1 channel audio recording & playback

Total 120 ips recording speed (Analogue video 60ips + IP video 60ips)

Total 120 ips display speed (Max 60ips over Network)

Built-in software multiplexer for all 16 live monitoring channels (1 / 4 / 9 / 13 / 16Ch Mode on CCTV Monitor as well as PC)

Maximum 4TB storage capacity (IEEE 1394 for external HDD)

ATM/POS transaction information text recording and search with corresponding video

4 pairs of sensor inputs and alarm outputs

Built-in hardware motion detection with search function (64-division comparison)

Various efficient back-up methods (IEEE 1394(FiWi), USB (V 1.1), Ethernet)

PTZ Control (Preset support) via RS 232 and RS 485/RS422

User-friendly 32bit True-colored Graphic OSD Menu

Dynamic IP (DHCP, Floating IP) support (when xDSL and Cable Modem are used)

IR remote controller (User controls PTZ with remote controller)

Remote Management Software (WDR Manager)

WDR-516S Installation Guide

7

Rev 1.0(93/11)

Image 7
Contents WDR-516S FCC Compliance Statement Important Notice WDR-516S Installation Guide Rev 1.093/11 Connecting External Device with Serial Port Appendix #1 Key features What is WDR-516S?Supplied Accessories WDR-516S Front Description & FunctionWDR-516S Rear Connecting camera Connecting & Running WDR-516SConnecting Audio Connecting MonitorSupplying Power Running OSD menu Using menuDialogue Box to Edit a Word Setting remote control DIP switch Setting remote controllerSet ID of WDR-516S Selecting WDR-516S Loading the batteries into remote controller Operable range of remote controllerBasic Configuration Advanced Configuration WDR-516S ConfigurationWDR-516S Installation Guide Rev 1.093/11 Viewing Image WDR-516S Basic SettingTime Zone Setting Date & TimeDaylight Saving Apply Date/Time Time FormatDate TimeSetting Recording Condition Speedips Configuration StatusChannel Status Recording Speed/QualityAudio Recording QualityApply Connecting Sensor Input Connecting and Configuring SensorS1 G Setting Sensor at OSD menu Connecting Relay Out Connecting & Configuring Relay OutConfiguring Relay Out Connecting Text Input Device ATM / POS / Access Control Connecting External Device with Serial PortConnecting RS485 Connecting & Configuring Serial Ports for Pan/Tilt/ZoomConnecting Serial Port Connecting RS232Configuring Serial Port Trimming Wire Connecting USB DeviceWDR-516S Installation Guide Rev 1.093/11 Available HDD Connecting External StorageConnecting IEEE1394 Device IEEE1394 BayRegistering & Formatting HDD Network Monitoring & Managing Connecting EthernetConfiguring WDR-516S’s Network Information Installing WDR Manager Using WDR ManagerPC System Requirements for running WDR Manager WDR-516S Installation Guide Rev 1.093/11 Uninstalling WDR Manager ConfigstationPlayback MonitorAppendix Installing & Replacing Appendix #1 Installing and Replacing internal HDDCompatible HDD Screw 6EA TOP Cover Installing single HDD Installing 2 HDDs HDD Cable WDR-516S Installation Guide Rev 1.093/11 Appendix #2 Video Input Video type / impedance setup switchHi-Z N on Reading manual of CD-ROM Appendix #3 Using CD-ROMComponents of CD- ROM disc PreparationNetwork Appendix #4 SpecificationGeneral Image CompressionInput/Output Data Backup/Expansion/CopyDisplay EnvironmentOthers PTZ ControlElectricity Mechanical Dimension WⅹDⅹH WeightWDR-516S Installation Guide Rev 1.093/11