<Note> Wire Handling
Trimming Wire
When connecting a wire to a terminal block, follow the instructions below. Note the different types of wire that can be used.
Stranded Wire: Peel off the wiring cover 8~10mm and solder it. Wire gage should be AWG 22 ~ 26.
Solid Wire: Peel off the wiring cover 8~10mm and solder it. Wire gage should be AWG 20 ~ 26.
Inserting & removing wire
To insert the wire, use a screwdriver as
shown in the diagram to the right.
13. Connecting USB Device
USB port can be used to copy up to 1 minute of images to a USB Flash memory disk. When connecting USB device, do not exceed the rated values of USB device.
USB Spec. | Ver 1.1 (Max 12M bps) |
|
|
Available Device | USB Memory Stick, |
|
|
Output Voltage/Current | Max. 200mA per DC 5V / Port |
|
|
<Note>
The disk should be formatted with FAT32 type.
| 34 | Rev 1.0(93/11) |