Maxtor WDR-516S manual Connecting External Device with Serial Port

11. Connecting External Device with Serial Port

11.1. Connecting Text Input Device (ATM / POS / Access Control)

In addition to images, the WDR-516S can record text data received from POS/ATM through the RS232 serial port.

Connect RS232 to 9pin D-sub of WDR-516S, and configure the “Text” sub-menu under the “System” tab.

Set “Serial Setup” under the “System” menu tab to “RS232” and “Device” to “Text.” The baud rate may d iffer for each device; consult the device manual for more information.

<Note>

Before installing any external device, consult with the local DENTEC distributor. Some external devices may not be compatible with the WDR-516S.

WDR-516S Installation Guide 31 Rev 1.0(93/11)