Maxtor WDR-516S manual Registering & Formatting HDD

14.4. Registering & Formatting HDD

“Disk Manager” will automatically run on start-up after installing a HDD.

If “Disk Manager” does not automatically run on start-up, make sure the HDD is properly installed.

(1)Press [ENTER] button at “Select Disk”.

(2)Select new added HDD (indicated as “[F]”) using [▲/▼] button and press [EXIT] button

(3)Select “Action” using [▲/▼] button and press [EXIT] button.

(4)Select “Add” using [◄ or ►] button and press [EXIT] button.

(5)Select “Apply” using [▲/▼] button and press [EXIT] button. The HDD status is changed to “[*]”.

(6)Select “Action” using [▲/▼] button and press [EXIT] button.

(7)Select “Format” using [◄ or ►] button and press [EXIT] button.

WDR-516S Installation Guide 37 Rev 1.0(93/11)