Maxtor WDR-516S manual Network Monitoring & Managing, Connecting Ethernet

(8)Select “Apply” using [▲/▼] button and press [EXIT] button. The HDD status is changed to “[R]” after formatting.

(9)Shut down “Disk Manager” by pressing [EXIT] button.

15. Network Monitoring & Managing

WDR-516S can be accessed, controlled, and managed from remote site via Internet/Intranet.

15.1. Connecting Ethernet

1)Turn off WDR-516S’s power switch.

2)Connect WDR-516S to hub with Ethernet cable.

3)Turn on WDR-516S’s power switch.

<Note>

1.Supply power to WDR-516S after connecting Ethernet cable to protect against electrical damage to WDR-516S.

2.Check cable connection status.

3.Check LED on WDR-516S’s rear panel after supplying power.

WDR-516S Installation Guide 38 Rev 1.0(93/11)