Maxtor manual Selecting WDR-516S

(3)Select “Miscellaneous” from the sub-menu list using the [▼] button and press the [ENETR] button.

(4)Select “Remote Control ID,” and press the [ENETR] button.

(5)Select a value using the [◄ or ►] buttons and press the [EXIT] button.

(6)Press the [EXIT] button to exit the Settings Page and return to Monitor mode.

<Note> Remote Control ID

Up to 16 WDRs can be controlled with a single remote controller.

6.3. Selecting WDR-516S

If several WDRs are set with unique ID numbers, they can be controlled with one remote controller. To select a specific WDR-516S, press the ID button of remote controller until the 8 LEDs on the front of the WDR-516S light up and a buzzer sounds.

Press repeatedly till to select WDR What you want

Remote Controller

PWR NET REC PLAY

Unselected	A1	A2	A3	A4
	PWR	NET	REC	PLAY
Selected	A1	A2	A3	A4

All LED Blink One Time

<Note>

Because remote controller ID is sixteen, WDR will correspond.

WDR-516S Installation Guide 17 Rev 1.0(93/11)