Maxtor AVE MVDR-5000 operation manual Menu Setup, REC Setting, KEY Functions, REC Rate

Page 32

4.MENU SETUP

4.MENU SETUP

There are 6 categories for operation setting in the menu setup system as shown below. The following sections will instruct you step by step how to configure the operation setting and state each menu’s purpose and options. Press the Setup button 9 to access the setup menu. Once inside the menu system, the on-screen menu allows you to set up the key features of the unit. The functions of various buttons within the menu-setup mode are described in the paragraphs below.

KEY FUNCTIONS

Setup button 9 :

Press to enter the setup menu. Press again to exit the setup mode.

^12 and “v” 13 buttons :

Press to select the desired item or entry for setting.

“<” 11 and “>” 14 buttons

Press to highlight the desired option or to select the context for setting.

Enter 15 button :

Press to enter the selected item and to save the setting.

Shuttle Ring 20 :

Turn to highlight the desired option or to select the context for setting.

Jog Dial 21 :

Turn to select the desired item or entry for setting.

4.1 REC Setting

MAIN MENU

RECORD

ALARM/ MOTION

TIMER/ SEQ/ TITLE

COMMUNICATION

DISK

SYSTEM

GOTO REC PAGE

This page allows you to set the recording rate and recording quality, and enables you to continue recording when the disk is full.

MAIN MENU

RECORD

ALARM/ MOTION

TIMER/ SEQ/ TITLE

COMMUNICATION

DISK

SYSTEM

GOTO REC PAGE

REC SETTING

REC RATE

: 15 F/S

REC QUALITY

: BEST

DISK FULL

: REWRITE

AUDIO

: OFF

 

 

MAIN PAGE

 

 

 

 

REC RATE :

This option is for adjusting the number of pictures recorded every second into a storage disk. The recording rate controls the frequency at which the number of video pictures can be recorded.

For an NTSC unit there are 11 different recording rates you can select from: 30F/S (30

frames per second), 15F/S, 10F/S, 6F/S, 2.7F/S, 1.2F/S, 0.61F/S, 0.35F/S, 1 F/8S, 1F/12S, and 1F/16S.

For a PAL unit, there are 11 different recording rates you can select from: 25F/S (25

frame per second), 12.5F/S, 8.3F/S, 5F/S,

30

Image 32
Contents Installation Page Safety Precautions Contents Product Introduction Product FeaturesIntroduction Front / Rear View Front ViewRec Indicator Disk IndicatorUp / Down CH4 / CH3 buttons Enter / Quad buttonPower Indicator Mobile Rack Power LEDShuttle Ring Jog DialAlarm OUT, Disk FULL, Record Rear ViewAlarm In / Out Above figure is the rear viewInstallation Connecting with 1 to 4 CamerasBasic Connection Attaching AN External Device to DVRHard-disk Drive Installation Location JumperSamsung MaxtorWestern Digital System Information and Channel Selection 01- 01-2005+2 59G 12.4 HR 20 F/SMode Key Result Display Live Quad Record CH1 Updating System SoftwareCH2 CH3 CH4Configuring Recording Settings OperationsNtsc Audio OFF Ntsc Audio on 11KHzOperations PAL Audio OFFPAL Audio on 11KHz Refresh Rate Frame/SecTimer Recording Recording OperationsManual Recording Main MenuSet ALM Operation to ON/ OFF Alarm / Motion RecordingMotion Externally Triggered Recording Playback Operations Normal PlaybackFast Forward/Backward Slow Forward/ReversePicture in Picture PinP Display Mode Play back Picture-by-pictureAlarm List Search Search OperationsFull List Search Time SearchClicking the Play button Thumbnail SearchThumbnail CD Menu for CD-ROM Model only SD Card SearchCD Menu Backup Menu for HARD-DISK Model only Rack HD Backup Operations for moreSave Backup OperationsCD Rewritable unit Backup Operations for CD-ROM Model only Set HD 2 to Backup first. Take the following steps Then set HD 2 Usage to BackupSD Card Backup Operations for Removable HDD Model Archive Single image Clips into an SD CardSave to M0000.AVI Save to M0001.AVI Save to M000N.AVI Save to F0000.JPG Save to F0001.JPG Save to F000N.JPGArchive video of AVI clips into an SD card Backup the System setting info into an SD card Key Lock OperationUpdating System Software SystemMenu Setup REC SettingREC Setting KEY FunctionsAlarm / Motion Setting REC QualityDisk Full AudioPRE- Alarm 30F/S 30 fields per second, 15F/S, 10F/SALM Type ALM DurationTimer / SEQ / Title Setting Motion SettingSENSITIVITY1 ~ ClockCommunication Setting REC EnableTimer SequencerNET Enable FTP SettingComm ID BaudDisk Setting System Setting OSD Language Operation LOGMenu Backgnd BuzzerSetup PWD DefaultSD Setup VersionCable Connections Network ConfigurationNetwork PIN no Configure Your DVR Network SettingsNetwork Http Port MaskGateway Connection 3 TCP/IP Communication SetupProperties to enter the Local Area Select Internet Protocol TCP/IP Control PanelNetwork.Connections Local Area Connection Connection Testing Click Start Command ProgramsSoftware installation Triplex 4 CH DVR Viewer Software IntroductionMessage C\Program Files\ Viewer Short introductionOperation Remote Control 【Multiscreen Buttons】:You can※ Capture / Print Print Click the Print Preview button Scroll the Original Image Size fromRemind the condition of recording Remote play and PTZ controlChange Pan/Tilt/Zoom Setting Remote play【Edit AVI】: 【Backup up to AVI】:【Backup to JPG】: Channel Number To choose Web Page ViewerConnecting the DVR Microsoft Internet ExplorerChange Record / Alarm Setting Browsing images from the DVRChange Timer Record Setting RS-232 & RS-485 Setup & Protocol 1 RS232 & RS485 SetupGeneral Command Format MiscellaneousDEC HEX REC Mode Non REC ModeRequest State Second Category=0x06 Description of System StateHard Disk Installation Built-in hard diskMobile Rack for Removable HDD Model Page System Default EnterO.S.D Message D Message MeaningsTime Index Table HD112-02-03 01-30-04 3000 Indexes 2999 02-03-04 02-08-04 Point stops recording Previously recorded data remainingSpecifications Model Number MVDR5000ScanIP Page Appendix 1. Using CD Discs For CD-RW Model onlyInserting Disc Ejecting The DiscRMN040200310V3.3