9.
Place the mobile rack back onto the device and screwing in all the 4 screws.
6.2.2 Mobile Rack (FOR REMOVABLE HDD MODEL)
1.2.
3.4.
| Pull the | |||
Make sure that the key outward | to | detach | the | |
is unlocked. | carrier | body | from | the |
mobile rack.
Slide the top cover backward and remove.
Setting the jumper of your hard disk driver. The way to set the jumper of the drive varies between manufacturers; please refer to the instructions on the driver to set the jumpers in the master position.
60