Maxtor AVE MVDR-5000 Appendix 1. Using CD Discs, For CD-RW Model only, Inserting Disc

Page 70

APPENDIX 1. – Using CD Discs

(FOR CD-RW MODEL ONLY)

Please note that when using CD-ROM, CD-R or CD-RW discs, do not write or stick anything on the surface as this could cause an error in recording or the data on the disc may be damaged.

Inserting Disc

1.Please press the eject button.

2.Please place the disc in the tray.

NOTE: When using a 12 cm disc, please place it in the center of the caddy where you are able to see the larger position specifically for the 12 cm disc. When using an 8 cm disc, please place it in the center of the caddy where you can see the position for the 8 cm disc. Please place the printed side up. Never place two discs in the caddy at the same time.

3.Please do not touch the surface of the disc where it has been recorded.

4.To insert the caddy please press the insert / eject button and hold the caddy lightly at the middle of its front and push gently to insert.

Ejecting The Disc

1.Press the eject button.

2.Carefully lift out the disc.

3.Press the eject button, or lightly touch the center of the tray and the tray will automatically reenter its position within the CD - RW recorder.

Caution: After the tray has been ejected and the disc has been retrieved from the caddy or put in the caddy, insert the tray in its original position to avoid the accumulation of dust or miscellaneous items inside the caddy, which may affect the pick up head when it needs to remain clean for effective reading of the data.

Emergency Eject Button

The device has an emergency eject button which allows for manual retrieval of the disc in case the machine needs repair, or there is a cut in the power supply. In the above circumstances use the following method to eject the disc.

1.The power supply has been cut.

2.Press the emergency eject button with a needle ( a paper clip, etc. can also be used ) and the tray will immediately eject.

68

Image 70
Contents Installation Page Safety Precautions Contents Introduction Product FeaturesProduct Introduction Front / Rear View Front ViewUp / Down CH4 / CH3 buttons Rec IndicatorDisk Indicator Enter / Quad buttonShuttle Ring Power IndicatorMobile Rack Power LED Jog DialAlarm OUT, Disk FULL, Record Rear ViewAlarm In / Out Above figure is the rear viewBasic Connection InstallationConnecting with 1 to 4 Cameras Attaching AN External Device to DVRHard-disk Drive Installation Location JumperWestern Digital MaxtorSamsung +2 59G 12.4 HR System Information and Channel Selection01- 01-2005 20 F/SCH2 CH3 Mode Key Result Display Live Quad Record CH1Updating System Software CH4Ntsc Audio OFF Configuring Recording SettingsOperations Ntsc Audio on 11KHzPAL Audio on 11KHz OperationsPAL Audio OFF Refresh Rate Frame/SecManual Recording Timer RecordingRecording Operations Main MenuMotion Alarm / Motion RecordingSet ALM Operation to ON/ OFF Externally Triggered Recording Fast Forward/Backward Playback OperationsNormal Playback Slow Forward/ReversePicture in Picture PinP Display Mode Play back Picture-by-pictureFull List Search Alarm List SearchSearch Operations Time SearchThumbnail Thumbnail SearchClicking the Play button CD Menu SD Card SearchCD Menu for CD-ROM Model only Backup Menu for HARD-DISK Model only Rack HD Backup Operations for moreCD Rewritable unit Backup Operations for CD-ROM Model only Backup OperationsSave Set HD 2 to Backup first. Take the following steps Then set HD 2 Usage to BackupSD Card Backup Operations for Removable HDD Model Archive Single image Clips into an SD CardArchive video of AVI clips into an SD card Save to F0000.JPG Save to F0001.JPG Save to F000N.JPGSave to M0000.AVI Save to M0001.AVI Save to M000N.AVI Updating System Software Backup the System setting info into an SD cardKey Lock Operation SystemREC Setting Menu SetupREC Setting KEY FunctionsDisk Full Alarm / Motion SettingREC Quality AudioALM Type PRE- Alarm30F/S 30 fields per second, 15F/S, 10F/S ALM DurationSENSITIVITY1 ~ Timer / SEQ / Title SettingMotion Setting ClockTimer Communication SettingREC Enable SequencerComm ID NET EnableFTP Setting BaudDisk Setting System Setting Menu Backgnd OSD LanguageOperation LOG BuzzerSD Setup Setup PWDDefault VersionNetwork Network ConfigurationCable Connections Network Configure Your DVR Network SettingsPIN no Gateway MaskHttp Port Properties to enter the Local Area 3 TCP/IP Communication SetupConnection Network.Connections Local Area Connection Control PanelSelect Internet Protocol TCP/IP Connection Testing Click Start Command ProgramsSoftware installation Triplex 4 CH DVR Viewer Software IntroductionMessage C\Program Files\ Viewer Short introductionOperation Remote Control 【Multiscreen Buttons】:You canRemind the condition of recording ※ Capture / Print Print Click the Print Preview buttonScroll the Original Image Size from Remote play and PTZ controlChange Pan/Tilt/Zoom Setting Remote play【Backup to JPG】: 【Backup up to AVI】:【Edit AVI】: Channel Number To choose Web Page ViewerConnecting the DVR Microsoft Internet ExplorerChange Record / Alarm Setting Browsing images from the DVRChange Timer Record Setting General Command Format RS-232 & RS-485 Setup & Protocol1 RS232 & RS485 Setup MiscellaneousDEC HEX Request State Second Category=0x06 REC ModeNon REC Mode Description of System StateHard Disk Installation Built-in hard diskMobile Rack for Removable HDD Model Page System Default EnterO.S.D Message D Message Meanings12-02-03 01-30-04 3000 Indexes 2999 02-03-04 02-08-04 Time Index TableHD1 Point stops recording Previously recorded data remainingSpecifications Model Number MVDR5000ScanIP Page Inserting Disc Appendix 1. Using CD DiscsFor CD-RW Model only Ejecting The DiscRMN040200310V3.3