Maxtor AVE MVDR-5000 Timer / SEQ / Title Setting, Motion Setting, SENSITIVITY1 ~, Clock

Page 35

MOTION SETTING:

The motion detection function is convenient for people without an alarm trigger input, but the function can be used with an alarm trigger input at the same time. If this function is enabled, the object movement will trigger the alarm recording just like the outside trigger signal. Before using the motion detection function, please turn the CH1/ CH2/ CH3/ CH4 options at ON, and set SENTIVITY (1 ~ 5) to a suitable value.

MOTION SETTING

CH1

: ON

CH2

: OFF

CH3

: OFF

CH4

: OFF

SENSITIVITY

: 3

MAIN PAGE

CH1/ CH2/ CH3/ CH4 :

These options enable/disable the motion detection.

ON: Enables the motion detection.

OFF: Disables the motion detection.

SENSITIVITY(1 ~ 5):

This option allows users to set the motion sensitivity. 1 is the most sensitive setting. 5 is the least sensitive setting.

4.3 TIMER / SEQ / TITLE Setting

MAIN MENU

RECORD

ALARM / MOTION

TIMER/ SEQ/ TITLE

COMMUNICATION

DISK

SYSTEM

GOTO CLOCK/ TIMER PAGE

The DVR provides a weekly table consisting of

two periods of time each day for scheduled recording. This option allows you to set the time each day when the DVR will start and stop recording.

MAIN MENU

RECORD

ALARM / MOTION

TIMER/ SEQ/ TITLE

COMMUNICATION

DISK

SYSTEM

GOTO CLOCK/ TIMER PAGE

TIMER/ SEQ/ TITLE

CLOCK

: SET

DAYLIGHT SAVING

: OFF

REC ENABLE

: ON

TIMER

: SET

SEQUENCER

: SET

TITLE

: SET

 

 

MAIN PAGE

 

 

 

 

CLOCK:

This entry allows users to set the system time.

NOTE: Clock data is retained for about 3 months after the 15-hour power supply is used up (the Operate On mode).

DAYLIGHT SAVING:

This entry allows users to set the daylight saving time.

OFF: Disables the daylight saving time.

USA: Daylight saving time begins at 2:00 a.m. on the first Sunday of April. Time reverts to standard time at 2:00 a.m. on the last Sunday in October.

EUROPE (Excepting the UK): Daylight saving time begins at 2:00 a.m. on the last Sunday of March. Time reverts to standard time at 2:00 a.m. on the last Sunday in October.

UK: Daylight saving time begins at 1:00 a.m.

33

Image 35
Contents Installation Page Safety Precautions Contents Product Introduction Product FeaturesIntroduction Front View Front / Rear ViewEnter / Quad button Rec IndicatorDisk Indicator Up / Down CH4 / CH3 buttonsJog Dial Power IndicatorMobile Rack Power LED Shuttle RingRear View Alarm OUT, Disk FULL, RecordAbove figure is the rear view Alarm In / OutAttaching AN External Device to DVR InstallationConnecting with 1 to 4 Cameras Basic ConnectionLocation Jumper Hard-disk Drive InstallationSamsung MaxtorWestern Digital 20 F/S System Information and Channel Selection01- 01-2005 +2 59G 12.4 HRCH4 Mode Key Result Display Live Quad Record CH1Updating System Software CH2 CH3Ntsc Audio on 11KHz Configuring Recording SettingsOperations Ntsc Audio OFFRefresh Rate Frame/Sec OperationsPAL Audio OFF PAL Audio on 11KHzMain Menu Timer RecordingRecording Operations Manual RecordingSet ALM Operation to ON/ OFF Alarm / Motion RecordingMotion Externally Triggered Recording Slow Forward/Reverse Playback OperationsNormal Playback Fast Forward/BackwardPlay back Picture-by-picture Picture in Picture PinP Display ModeTime Search Alarm List SearchSearch Operations Full List SearchClicking the Play button Thumbnail SearchThumbnail CD Menu for CD-ROM Model only SD Card SearchCD Menu Rack HD Backup Operations for more Backup Menu for HARD-DISK Model onlySave Backup OperationsCD Rewritable unit Backup Operations for CD-ROM Model only Then set HD 2 Usage to Backup Set HD 2 to Backup first. Take the following stepsArchive Single image Clips into an SD Card SD Card Backup Operations for Removable HDD ModelSave to M0000.AVI Save to M0001.AVI Save to M000N.AVI Save to F0000.JPG Save to F0001.JPG Save to F000N.JPGArchive video of AVI clips into an SD card System Backup the System setting info into an SD cardKey Lock Operation Updating System SoftwareKEY Functions Menu SetupREC Setting REC SettingAudio Alarm / Motion SettingREC Quality Disk FullALM Duration PRE- Alarm30F/S 30 fields per second, 15F/S, 10F/S ALM TypeClock Timer / SEQ / Title SettingMotion Setting SENSITIVITY1 ~Sequencer Communication SettingREC Enable TimerBaud NET EnableFTP Setting Comm IDDisk Setting System Setting Buzzer OSD LanguageOperation LOG Menu BackgndVersion Setup PWDDefault SD SetupCable Connections Network ConfigurationNetwork PIN no Configure Your DVR Network SettingsNetwork Http Port MaskGateway Connection 3 TCP/IP Communication SetupProperties to enter the Local Area Select Internet Protocol TCP/IP Control PanelNetwork.Connections Local Area Connection Click Start Command Programs Connection TestingTriplex 4 CH DVR Viewer Software Introduction Software installationShort introduction Message C\Program Files\ Viewer【Multiscreen Buttons】:You can Operation Remote ControlRemote play and PTZ control ※ Capture / Print Print Click the Print Preview buttonScroll the Original Image Size from Remind the condition of recordingRemote play Change Pan/Tilt/Zoom Setting【Edit AVI】: 【Backup up to AVI】:【Backup to JPG】: Web Page Viewer Channel Number To chooseMicrosoft Internet Explorer Connecting the DVRBrowsing images from the DVR Change Record / Alarm SettingChange Timer Record Setting Miscellaneous RS-232 & RS-485 Setup & Protocol1 RS232 & RS485 Setup General Command FormatDEC HEX Description of System State REC ModeNon REC Mode Request State Second Category=0x06Built-in hard disk Hard Disk InstallationMobile Rack for Removable HDD Model Page Enter System DefaultD Message Meanings O.S.D MessagePoint stops recording Previously recorded data remaining Time Index TableHD1 12-02-03 01-30-04 3000 Indexes 2999 02-03-04 02-08-04Model Number MVDR5000 SpecificationsScanIP Page Ejecting The Disc Appendix 1. Using CD DiscsFor CD-RW Model only Inserting DiscRMN040200310V3.3