Maxtor AVE MVDR-5000 operation manual Rear View, Alarm OUT, Disk FULL, Record

Page 9

1.3.2 Rear View

25

26

27

28

IN

OUT

IN

hi-z

 

75

SD Card

RS-485

 

OUT

ETHERNET

RS-232

MONITOR AUDIO

ALARM I/O

DC12V

 

29 30 31 32

25 VIDEO IN Connector: These 4 BNC connectors are used to connect the video output from a camera

26Hi-Z/75 Ω Individual termination: These 4 switches are used to set the impedance of each loop between 75Ω and Hi-Z.

27SD CARD Slot: This is used for system software updating and archiving/accessing critical images.

28RS-232Port: The RS-232 communication port functions as a connector to an external control device.

29MONITOR Connector: The connector links the unit’s composite video to a display device.

30AUDIO OUT: This connector is used to link the device’s audio input.

31AUDIO IN Connector: This connector is used to connect the audio output from a camera or other devices to the DVR.

32ETHERNET 10/100 Connector: This is one standard RJ-45 connector for 10/100 Mbps Ethernet networks.

33RS-485Port: The RS-485 communication ports function as connectors when two or more units are serially connected to an external control device.

34ALARM I/O: This is a 9-PIN D-SUB

33

34

35

36 37

connector including SWITCH OUT, GROUND,

ALARM OUT, DISK FULL, RECORD IN,

ALARM RESET, and ALARM IN for connecting with external devices. Please refer to the next section for details.

35Wire Catch: The wire catch secures the power cord and keeps it in place (so that it does not droop or hang loosely).

36Ground Screw: The ground screw is for the chassis terminal.

37Plug Inlet: The inlet connects to an external power supply. Connect 12 V DC UL Listed Class 2 Power Supply.

7

Image 9
Contents Installation Page Safety Precautions Contents Product Features IntroductionProduct Introduction Front View Front / Rear ViewDisk Indicator Rec IndicatorUp / Down CH4 / CH3 buttons Enter / Quad buttonMobile Rack Power LED Power IndicatorShuttle Ring Jog DialRear View Alarm OUT, Disk FULL, RecordAbove figure is the rear view Alarm In / OutConnecting with 1 to 4 Cameras InstallationBasic Connection Attaching AN External Device to DVRLocation Jumper Hard-disk Drive InstallationMaxtor Western DigitalSamsung 01- 01-2005 System Information and Channel Selection+2 59G 12.4 HR 20 F/SUpdating System Software Mode Key Result Display Live Quad Record CH1CH2 CH3 CH4Operations Configuring Recording SettingsNtsc Audio OFF Ntsc Audio on 11KHzPAL Audio OFF OperationsPAL Audio on 11KHz Refresh Rate Frame/SecRecording Operations Timer RecordingManual Recording Main MenuAlarm / Motion Recording MotionSet ALM Operation to ON/ OFF Externally Triggered Recording Normal Playback Playback OperationsFast Forward/Backward Slow Forward/ReversePlay back Picture-by-picture Picture in Picture PinP Display ModeSearch Operations Alarm List SearchFull List Search Time SearchThumbnail Search ThumbnailClicking the Play button SD Card Search CD MenuCD Menu for CD-ROM Model only Rack HD Backup Operations for more Backup Menu for HARD-DISK Model onlyBackup Operations CD Rewritable unit Backup Operations for CD-ROM Model onlySave Then set HD 2 Usage to Backup Set HD 2 to Backup first. Take the following stepsArchive Single image Clips into an SD Card SD Card Backup Operations for Removable HDD ModelSave to F0000.JPG Save to F0001.JPG Save to F000N.JPG Archive video of AVI clips into an SD cardSave to M0000.AVI Save to M0001.AVI Save to M000N.AVI Key Lock Operation Backup the System setting info into an SD cardUpdating System Software SystemREC Setting Menu SetupREC Setting KEY FunctionsREC Quality Alarm / Motion SettingDisk Full Audio30F/S 30 fields per second, 15F/S, 10F/S PRE- AlarmALM Type ALM DurationMotion Setting Timer / SEQ / Title SettingSENSITIVITY1 ~ ClockREC Enable Communication SettingTimer SequencerFTP Setting NET EnableComm ID BaudDisk Setting System Setting Operation LOG OSD LanguageMenu Backgnd BuzzerDefault Setup PWDSD Setup VersionNetwork Configuration NetworkCable Connections Configure Your DVR Network Settings NetworkPIN no Mask GatewayHttp Port 3 TCP/IP Communication Setup Properties to enter the Local AreaConnection Control Panel Network.Connections Local Area ConnectionSelect Internet Protocol TCP/IP Click Start Command Programs Connection TestingTriplex 4 CH DVR Viewer Software Introduction Software installationShort introduction Message C\Program Files\ Viewer【Multiscreen Buttons】:You can Operation Remote ControlScroll the Original Image Size from ※ Capture / Print Print Click the Print Preview buttonRemind the condition of recording Remote play and PTZ controlRemote play Change Pan/Tilt/Zoom Setting【Backup up to AVI】: 【Backup to JPG】:【Edit AVI】: Web Page Viewer Channel Number To chooseMicrosoft Internet Explorer Connecting the DVRBrowsing images from the DVR Change Record / Alarm SettingChange Timer Record Setting 1 RS232 & RS485 Setup RS-232 & RS-485 Setup & ProtocolGeneral Command Format MiscellaneousDEC HEX Non REC Mode REC ModeRequest State Second Category=0x06 Description of System StateBuilt-in hard disk Hard Disk InstallationMobile Rack for Removable HDD Model Page Enter System DefaultD Message Meanings O.S.D MessageHD1 Time Index Table12-02-03 01-30-04 3000 Indexes 2999 02-03-04 02-08-04 Point stops recording Previously recorded data remainingModel Number MVDR5000 SpecificationsScanIP Page For CD-RW Model only Appendix 1. Using CD DiscsInserting Disc Ejecting The DiscRMN040200310V3.3