Maxtor AVE MVDR-5000 Request State Second Category=0x06, Description of System State, REC Mode

Page 60

2004/06/20 17:05:00 = <0xD4>, <0x07>, <0x06>, <0x14>, <0x11>, <0x05>, <0x00> DVR Act: Changing the time and date.

D. Request State (Second Category=0x06)

PC Request: <0x41>, <0x01>, <0x20>, <0x02>, <0x06>, <0x00>, <0x4f>

DVR Response: <0x41>, <0x20>, <0x01>, <0x02>, <0x06>, <0x01>, <System State = 0..>, <0x4f>

Description of <System State>:

STATE_STOP0

STATE_PLAY3

STATE_SETUP 6

STATE_SEARCH 7

STATE_BACKUP 15

E. Time Search (Second Category=0x0b)

PC message: <0x41>, <0x01>, <0x20>, <0x02>, <0x0b>, <0x06>, <6 Bytes Date/Time>, <0x4f> where < 6 bytes Date/Time >, = year (2 bytes, =LowByte + HighByte*256), month (1 byte), day (1 byte), hour (1 byte), min (1 byte)

Example: to search 06/12/2004 17:00 the Date/Time = <0xd4>, <0x07>, <0x06>, <0x0c>, <0x11>, <0x00> where 2004= 212(=0xd4) + 7(=0x07) *256

F. Request HDD Info (Second Category=0x10)

PC message: <0x41>, <0x01>, <0x20>, <0x02>, <0x10>, <0x00>, <0x4f>

DVR Response: <0x41>, <0x20>, <0x01>, <0x02>, <0x10>, <0x32>, <0x00>, <0x00>, <48 Bytes Data> <0x4f>

<48 Bytes Data>=4 HDD Status( Primary Master/Slave, Secondary Master/Slave ) Every HDD uses 12 Bytes=

#0 :HDD Exists ( if = 1 ) #1 :Active HDD ( if = 1 )

#2 :Current HDD for REC ( if = 1 ) #3 :Current HDD for PLAY ( if = 1 ) #4…#7 :Capacity

#8.. #11 :REC/PLAY Position

G. Request REC Position (Second Category=0x11)

PC message: <0x41>, <0x01>, <0x20>, <0x02>, <0x11>, <0x00>, <0x4f>

REC Mode

DVR Response: <0x41>, <0x20>, <0x01>, <0x02>, <0x11>, <0x08>, <HDD#>, <0x0>, <4 Bytes REC Position>, <2 Bytes Image NO.>, <0x4f>

Get HDD#, REC Position and Image NO. used in Playback Immediately command

Non REC Mode

DVR Response ERROR: <0x41>, <0x20>, <0x01>, <0x02>, <0x11>, <0x01>, <0x45>, <0x4f>

H. Playback Immediately (Second Category=0x12)

PC message: <0x41>, <0x01>, <0x20>, <0x02>, <0x12>, <0x0a>,<HDD#>, <0x0>, <0x0>, <0x0>,<4 Bytes REC Position>, <2 Bytes Image NO.>, <0x4f>

On Success

DVR Response: <0x41>, <0x20>, <0x01>, <0x02>, <0x12>, <0x00>, <0x4f> On Error

DVR Response ERROR: <0x41>, <0x20>, <0x01>, <0x02>, <0x12>, <0x01>, <0x45>, <0x4f>

58

Image 60
Contents Installation Page Safety Precautions Contents Product Features IntroductionProduct Introduction Front / Rear View Front ViewRec Indicator Disk IndicatorUp / Down CH4 / CH3 buttons Enter / Quad buttonPower Indicator Mobile Rack Power LEDShuttle Ring Jog DialAlarm OUT, Disk FULL, Record Rear ViewAlarm In / Out Above figure is the rear viewInstallation Connecting with 1 to 4 CamerasBasic Connection Attaching AN External Device to DVRHard-disk Drive Installation Location JumperMaxtor Western DigitalSamsung System Information and Channel Selection 01- 01-2005+2 59G 12.4 HR 20 F/SMode Key Result Display Live Quad Record CH1 Updating System SoftwareCH2 CH3 CH4Configuring Recording Settings OperationsNtsc Audio OFF Ntsc Audio on 11KHzOperations PAL Audio OFFPAL Audio on 11KHz Refresh Rate Frame/SecTimer Recording Recording OperationsManual Recording Main MenuAlarm / Motion Recording MotionSet ALM Operation to ON/ OFF Externally Triggered Recording Playback Operations Normal PlaybackFast Forward/Backward Slow Forward/ReversePicture in Picture PinP Display Mode Play back Picture-by-pictureAlarm List Search Search OperationsFull List Search Time SearchThumbnail Search ThumbnailClicking the Play button SD Card Search CD MenuCD Menu for CD-ROM Model only Backup Menu for HARD-DISK Model only Rack HD Backup Operations for moreBackup Operations CD Rewritable unit Backup Operations for CD-ROM Model onlySave Set HD 2 to Backup first. Take the following steps Then set HD 2 Usage to BackupSD Card Backup Operations for Removable HDD Model Archive Single image Clips into an SD CardSave to F0000.JPG Save to F0001.JPG Save to F000N.JPG Archive video of AVI clips into an SD cardSave to M0000.AVI Save to M0001.AVI Save to M000N.AVI Backup the System setting info into an SD card Key Lock OperationUpdating System Software SystemMenu Setup REC SettingREC Setting KEY FunctionsAlarm / Motion Setting REC QualityDisk Full AudioPRE- Alarm 30F/S 30 fields per second, 15F/S, 10F/SALM Type ALM DurationTimer / SEQ / Title Setting Motion SettingSENSITIVITY1 ~ ClockCommunication Setting REC EnableTimer SequencerNET Enable FTP SettingComm ID BaudDisk Setting System Setting OSD Language Operation LOGMenu Backgnd BuzzerSetup PWD DefaultSD Setup VersionNetwork Configuration NetworkCable Connections Configure Your DVR Network Settings NetworkPIN no Mask GatewayHttp Port 3 TCP/IP Communication Setup Properties to enter the Local AreaConnection Control Panel Network.Connections Local Area ConnectionSelect Internet Protocol TCP/IP Connection Testing Click Start Command ProgramsSoftware installation Triplex 4 CH DVR Viewer Software IntroductionMessage C\Program Files\ Viewer Short introductionOperation Remote Control 【Multiscreen Buttons】:You can※ Capture / Print Print Click the Print Preview button Scroll the Original Image Size fromRemind the condition of recording Remote play and PTZ controlChange Pan/Tilt/Zoom Setting Remote play【Backup up to AVI】: 【Backup to JPG】:【Edit AVI】: Channel Number To choose Web Page ViewerConnecting the DVR Microsoft Internet ExplorerChange Record / Alarm Setting Browsing images from the DVR Change Timer Record Setting RS-232 & RS-485 Setup & Protocol 1 RS232 & RS485 SetupGeneral Command Format MiscellaneousDEC HEX REC Mode Non REC ModeRequest State Second Category=0x06 Description of System StateHard Disk Installation Built-in hard diskMobile Rack for Removable HDD Model Page System Default EnterO.S.D Message D Message MeaningsTime Index Table HD112-02-03 01-30-04 3000 Indexes 2999 02-03-04 02-08-04 Point stops recording Previously recorded data remainingSpecifications Model Number MVDR5000ScanIP Page Appendix 1. Using CD Discs For CD-RW Model onlyInserting Disc Ejecting The DiscRMN040200310V3.3