Maxtor AVE MVDR-5000 operation manual Product Introduction, Product Features

Page 5

1. INTRODUCTION

1. INTRODUCTION

1.1 Product Introduction

This MVDR-5000 is a storage media of digital video image, which uses hard disk drives instead of VCR tapes to store video. It enables you to enjoy the extreme flexibility of digital image archiving instead of clumsy tape management. Equipped with a range of comprehensive features, such as playback picture-by-picture, quick access video recording by time and event, system software which can be upgraded, the expandable capacities of hard drive, and much more, the DVR will make your applications far more flexible and effective than ever before. For all, the DVR is going to prove the timely substitute for Time-lapse VCR.

1.2 Product Features

The full-capability triplex DVR allows video recording while viewing live video images and video playback images at the same time.

Stores video in hard-disk drives instead of VCR tapes.

Main recording media: one hard-disk drive capability and one removable hard-disk. (For removable model only)

Main recording media: one fixed HDD plus a CD-RW. (For CD-ROM model only) Hard-disk drive with hot-swapping capability.

Pre-alarm image recording. Time-lapse and real-time recording. Refresh rate up to 30 IPS (25 IPS for PAL).

Image quality selectable at 4 different

3

levels for recording. Event/Timer/Alarm recording mode. Quick search by time, alarm, event, and recording list.

Fast and slow playback of recorded video at various speeds.

Single-picture playback.

On-screen setup menu, title and system timer.

Password protection. Motion detection.

Disk-full warning and operation status LEDs.

RS-232, RS-485 communication ports. Remote control via RS-232, RS-485 and Ethernet ports.

Recovery on power interruption. Operation-status record log.

Distributes live and recorded images through the TCP/IP network environment. Audio function included

Built-in SD card slot for copying images to an SD card

Supports DHCP protocol.

Image 5
Contents Installation Page Safety Precautions Contents Product Introduction Product FeaturesIntroduction Front View Front / Rear ViewDisk Indicator Rec IndicatorUp / Down CH4 / CH3 buttons Enter / Quad buttonMobile Rack Power LED Power IndicatorShuttle Ring Jog DialRear View Alarm OUT, Disk FULL, RecordAbove figure is the rear view Alarm In / OutConnecting with 1 to 4 Cameras InstallationBasic Connection Attaching AN External Device to DVRLocation Jumper Hard-disk Drive InstallationSamsung MaxtorWestern Digital 01- 01-2005 System Information and Channel Selection+2 59G 12.4 HR 20 F/SUpdating System Software Mode Key Result Display Live Quad Record CH1CH2 CH3 CH4Operations Configuring Recording SettingsNtsc Audio OFF Ntsc Audio on 11KHzPAL Audio OFF OperationsPAL Audio on 11KHz Refresh Rate Frame/SecRecording Operations Timer RecordingManual Recording Main MenuSet ALM Operation to ON/ OFF Alarm / Motion RecordingMotion Externally Triggered Recording Normal Playback Playback OperationsFast Forward/Backward Slow Forward/ReversePlay back Picture-by-picture Picture in Picture PinP Display ModeSearch Operations Alarm List SearchFull List Search Time SearchClicking the Play button Thumbnail SearchThumbnail CD Menu for CD-ROM Model only SD Card SearchCD Menu Rack HD Backup Operations for more Backup Menu for HARD-DISK Model onlySave Backup OperationsCD Rewritable unit Backup Operations for CD-ROM Model only Then set HD 2 Usage to Backup Set HD 2 to Backup first. Take the following stepsArchive Single image Clips into an SD Card SD Card Backup Operations for Removable HDD ModelSave to M0000.AVI Save to M0001.AVI Save to M000N.AVI Save to F0000.JPG Save to F0001.JPG Save to F000N.JPGArchive video of AVI clips into an SD card Key Lock Operation Backup the System setting info into an SD cardUpdating System Software SystemREC Setting Menu SetupREC Setting KEY FunctionsREC Quality Alarm / Motion SettingDisk Full Audio30F/S 30 fields per second, 15F/S, 10F/S PRE- AlarmALM Type ALM DurationMotion Setting Timer / SEQ / Title SettingSENSITIVITY1 ~ ClockREC Enable Communication SettingTimer SequencerFTP Setting NET EnableComm ID BaudDisk Setting System Setting Operation LOG OSD LanguageMenu Backgnd BuzzerDefault Setup PWDSD Setup VersionCable Connections Network ConfigurationNetwork PIN no Configure Your DVR Network SettingsNetwork Http Port MaskGateway Connection 3 TCP/IP Communication SetupProperties to enter the Local Area Select Internet Protocol TCP/IP Control PanelNetwork.Connections Local Area Connection Click Start Command Programs Connection TestingTriplex 4 CH DVR Viewer Software Introduction Software installationShort introduction Message C\Program Files\ Viewer【Multiscreen Buttons】:You can Operation Remote ControlScroll the Original Image Size from ※ Capture / Print Print Click the Print Preview buttonRemind the condition of recording Remote play and PTZ controlRemote play Change Pan/Tilt/Zoom Setting【Edit AVI】: 【Backup up to AVI】:【Backup to JPG】: Web Page Viewer Channel Number To chooseMicrosoft Internet Explorer Connecting the DVRBrowsing images from the DVR Change Record / Alarm SettingChange Timer Record Setting 1 RS232 & RS485 Setup RS-232 & RS-485 Setup & ProtocolGeneral Command Format MiscellaneousDEC HEX Non REC Mode REC ModeRequest State Second Category=0x06 Description of System StateBuilt-in hard disk Hard Disk InstallationMobile Rack for Removable HDD Model Page Enter System DefaultD Message Meanings O.S.D MessageHD1 Time Index Table12-02-03 01-30-04 3000 Indexes 2999 02-03-04 02-08-04 Point stops recording Previously recorded data remainingModel Number MVDR5000 SpecificationsScanIP Page For CD-RW Model only Appendix 1. Using CD DiscsInserting Disc Ejecting The DiscRMN040200310V3.3